See my answers below. Thanks again for your help. > > 2. nano doesn't work if you telnet into the atv bootloader. I get > > For some reason, ubuntu (or the install I was using) doesn't have a / > usr/share/terminfo/l/linux file. > > export TERM=xterm-basic > > seems to fix it for example, or symlinking linux-basic to just linux > in the proper dir. > > > "error opening terminal: linux" when trying to run it.
Is this something you can fix in a later release of the bootloader? > > 3. my gyration keyboard doesn't work in the bootloader. It works fine > > after linux boots and I don't think it needs a driver, so I can't > > figure this one out. > > Did this work with the older recovery image? I'm 99% sure it did. I know I used it with rev .6 of the bootloader. not sure about .7. > > 4. I get a lot of rx ethernet errors in linux. I thought Scott fixed > > this years ago. something with interrupts? > > In this an issue while booted to recovery or after you've kexec'd into > the distro of choice? > I personally don't see any of these while booted to recovery... > sorry. I should have been clearer about this. I get these errors after booting linux (ubuntu server 11.04 in my case). I thought it was an interrupt problem scott fixed in the bootloader, but I've since researched it and found it is a cpu sleep issue. I don't think this is actually your problem. -- To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/atv-bootloader?hl=en
