sure. I'll post it later tonight. thanks again!
On Jul 22, 3:10 pm, Travis Hansen <[email protected]> wrote: > I plan on fixing the nano issue yes. > > The keyboard issue is likely something missing from the kernel. Can > you send me the dmesg output from a system booted where it's working? > > On Jul 22, 12:45 pm, dkeefe <[email protected]> wrote: > > > > > > > > > See my answers below. > > > Thanks again for your help. > > > > > 2. nano doesn't work if you telnet into the atv bootloader. I get > > > > For some reason, ubuntu (or the install I was using) doesn't have a / > > > usr/share/terminfo/l/linux file. > > > > export TERM=xterm-basic > > > > seems to fix it for example, or symlinking linux-basic to just linux > > > in the proper dir. > > > > > "error opening terminal: linux" when trying to run it. > > > Is this something you can fix in a later release of the bootloader? > > > > > 3. my gyration keyboard doesn't work in the bootloader. It works fine > > > > after linux boots and I don't think it needs a driver, so I can't > > > > figure this one out. > > > > Did this work with the older recovery image? > > > I'm 99% sure it did. I know I used it with rev .6 of the bootloader. > > not sure about .7. > > > > > 4. I get a lot of rx ethernet errors in linux. I thought Scott fixed > > > > this years ago. something with interrupts? > > > > In this an issue while booted to recovery or after you've kexec'd into > > > the distro of choice? > > > I personally don't see any of these while booted to recovery... > > > sorry. I should have been clearer about this. I get these errors after > > booting linux (ubuntu server 11.04 in my case). I thought it was an > > interrupt problem scott fixed in the bootloader, but I've since > > researched it and found it is a cpu sleep issue. I don't think this is > > actually your problem. -- To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/atv-bootloader?hl=en
