IME the benefits of AES/EBU (100ohm balanced) over SPDIF or TOSLINK for
distances less than 5 meters are not audible. Even then, it's not a
audio quality degradation so much as the fact that the clock recovery
CAN get flaky. YMMV. I certainly wouldn't be swayed for/against a
product by its inclusion or exclusion, personally.

I have used all these interfaces extensively (and other non-domestic
ones such as TDIF) in a studio environment.

The claimed benefit of AES/EBU (better RF rejection) is moot against
Toslink...

Of course some people just think that Toslink is bad - period. Wonder
what they would make of the fact that a lot of album tracks are done
using ADAT Lightpipe which (essentially) is a super-dooper multitrack
Toslink?



Interestingly, AES3id (75ohm BNC+unbalanced coax) is arguably the best
connection from a technical standpoint but is rarely discussed on this
forum. However I suppose most of us don't have to run 50 meter digital
lines!


-- 
Phil Leigh

You want to see the signal path BEFORE it gets onto a CD/vinyl...it
ain't what you'd call minimal...

...SB3+TACT+Altmann+MF DACXV3/Linn tri-amped Aktiv 5.1 system and some
very expensive cables ;o)
------------------------------------------------------------------------
Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85
View this thread: http://forums.slimdevices.com/showthread.php?t=38637

_______________________________________________
audiophiles mailing list
[email protected]
http://lists.slimdevices.com/lists/listinfo/audiophiles

Reply via email to