Eric Carroll wrote: > Robin, > > I thought fw40 was still unstable, is it safe to go into the water now?
Eric, fw40, and fw42 are not production grade, i.e. there are known issues with both versions. However, I've found that both work just fine for me. > Is there anything special to getting this going? Not really - turn on the digital loop, plug the DEQ2496 into the loop & configure. > I have a DEQ2496 and want to wire up the Tp through it using AES in a > digital loop configuration. That's exactly how mine is connected. One tip: you can make sure the loop is working as follows: 1. connect a cable from digital out to digital in 2. turn on the loop 3. Play something 4. pull out the cable The loop is working if the sound works at step 3. then stops at step 4. Good luck figuring out how to configure the DEQ2496 - I seem to recall grabbing a step-by-step guide from the Behringer web site but I can't find it again. R. _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/lists/listinfo/audiophiles
