radish;399223 Wrote: > OK, so an update for the previous post. On a hunch I did a test with the > exact same settings for both recordings (same audio, same player, same > fw, same everything). The result I got was almost identical to the > sc7.3.3 vs sc7.4 test I just posted (85dB down, high freq musical > content present) so I'm going to say that's just the limits of the > measurement system. Thus, 7.3.3 and 7.4 produce identical audio in my > setup.
Did you check the "compensate for sample rate drift" box on advanced settings and also check the depth evaluation freq range to be 20-20kHz? With the same input file and the above settings I can get a depth of over -100dB (see my brightness test results for example) - might be worth a quick recheck if you still have your test files - you don't need to re-record them -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... SB3 (wired) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Outdoors: Boom ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=60041 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
