NewBuyer;515449 Wrote: > Hey there Phil, > Did you ever fully get to the bottom of those repeating-interval LF > artifacts you measured on your SB3 analog outs, and on the difference > between your measurements and JA's measurements? Is your SB3 unit > possibly faulty, or is it possibly resulting from a ground loop through > the interconnect shield between your SB3 and computer/soundcard etc? > Just curious... > > It would also be interesting to see if your results change, if you > might happen to have a line-level transformer (EBTech unit, etc) to > place between SB3 analog outs and soundcard analog ins, for > isolation/balance-conversion...
I'll look into it at the weekend... SB3 not faulty. Will retest with Touch and SB3. -- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... SB Touch Beta (wired) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=72147 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
