You have TP volume at 100, right? The test signal via analogue output of the TP will overload the Tascam analogue input. If you reduce the TP level slightly it will work. Most "soundcards" don't have a true analogue level trim right at the input, so messing with the mixer levels won't help, the overload has already happened. I use a passive pre-amp (actually, it's just a high quality ALPS Blue pot)between test device and card-in to trim a couple of dB from the input signal. That's why my Touch results show very slightly down at Vol=100... As you can see from the frequency response measurement, the pot does nothing it shouldn't!
-- Phil Leigh You want to see the signal path BEFORE it gets onto a CD/vinyl...it ain't what you'd call minimal... Touch(wired/XP) - TACT 2.2X (Linear PSU) + Good Vibrations S/W - MF Triplethreat(Audiocom full mods) - Linn 5103 - Aktiv 5.1 system (6x LK140's, ESPEK/TRIKAN/KATAN/SEIZMIK 10.5), Townsend Supertweeters, Blue Jeans Digital,Kimber Speaker & Chord Interconnect cables Kitchen Boom, Outdoors: SB Radio ------------------------------------------------------------------------ Phil Leigh's Profile: http://forums.slimdevices.com/member.php?userid=85 View this thread: http://forums.slimdevices.com/showthread.php?t=78451 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
