Phil Leigh;544662 Wrote: > Ah. I think we are at cross-purposes here. > > The test method I am using is: > > 1) generate the test file in RMAA (you only need to do this once) > 2) play back on SB device using SBS and... > 3) record analogue output from SB device into soundcard (RMAA is not > involved in this step) > 4) use RMAA to open and analyse recorded file > > > The calibration file is not required for any of this. It is used for > speaker testing.
Ah !! I was wondering about doing it that way but didn't think it should matter if RightMark analyzes "Live" or analyzes a recorded wav (that I just recorded "Live") should be the same. RightMark basically records it and then analyzes what it recorded. I'll try it that way. However doing everything I've done does work Live. Except playing WAV. It's also the only path that reports calibration levels are distorted. If your not doing calibration file. How do you know you have the levels set right? You eye balling clip lights during the Test? -- mswlogo XP > Cat5 > Transporter/DuetController > SPDIF > Meridian G68 > DSP6000, DSP5500HC, DSP5000 XP > Cat5 > SB3 > SPDIF > Meridian DSP5000 XP > Cat5 > DuetReceiver > SPDIF > Meridian G91 > DSP5000 'My Transporter Setup' (http://forums.slimdevices.com/showpost.php?p=350741&postcount=45) 'Hitch Hikers Guide to Meridian' (http://www.meridianunplugged.com) ------------------------------------------------------------------------ mswlogo's Profile: http://forums.slimdevices.com/member.php?userid=9090 View this thread: http://forums.slimdevices.com/showthread.php?t=78451 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
