sckramer;678015 Wrote: > ok, but you also bypassed the toslink at the same time (or did you have > that out beforehand) -- any suggestions on a good bnc connector that > would work (easy to install/wire)? > > I need to say again, removing the toslink is a big deal..... ( hoping > this is the bulk of the improvement from hooking the coax to the board, > this is easier to do ) > > (mcr, you should do this if not already--) > > edit... SBGK, I was thinking, is your toslink out of the circuit now? > you soldered the coax straight to the board, but is your toslink still > active?
took toslink out first, completely off the circuit, destroyed actually as it melted when taking it off. a week later tried the coax soldered onto the main board. this is the bnc I use http://www.ebay.co.uk/itm/BNC-Reference-Connectors-Quality-Gold-Plated-/260429501016?pt=UK_Computing_CablesConnectors_RL&hash=item3ca2ced258 needless to say, I would also recommend going to TT3.0 with the priority mods I posted a few pages back at buffer 3400, the sound is spectacular on my system at least. -- SBGK ------------------------------------------------------------------------ SBGK's Profile: http://forums.slimdevices.com/member.php?userid=52003 View this thread: http://forums.slimdevices.com/showthread.php?t=91322 _______________________________________________ audiophiles mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/audiophiles
