|
Microair radio which start to show Chinese
characters on LCD screen
Sorry about the yellow again but need your attention. While at Camden
a few weeks ago I saw this problem again in the DG1000 If you also have
this problem please do not use the radio until it is fixed. The problem is
caused by the EPROM legs not making good contact with its socket. Now
it is something owners could fix rather than return the radio as it is a matter
of reseating the EPROM. A person used to exchanging proms could do the job.
There is an excellent Service Bulletin 03 from Microair with detailed
photos and drawings and I would rather you ask for a copy of
same. If desperate 1. remove cover (have a good fitting X
screwdriver as they can be real tight) and 2. locate the square EPROM at the
back of the LCD display. 3 Remove this IC with a remover using appropiate static
earthing. 4. All the leg loops need to come out further from the side of
EPROM so it all makes contact again. 5 Replace EPROM and cover and
job is done.
Remember I would prefer if you were to get SB-03 and I will try and put
same on my web site and/or make it available by email.
Think most of the Icom boom mics have had their mic inserts replaced
with better insert.
That's all
Ian McPhee
Box 657 Byron Bay NSW 2481 Australia Tel +61 (0)2 66 847 642 Mob +61 (0)428 847 642 [EMAIL PROTECTED] www.mrsoaring.com Wing Stand $140 now with improved top and strap |
<<wingstand_t.jpg>>
_______________________________________________ Aus-soaring mailing list [EMAIL PROTECTED] http://lists.internode.on.net/mailman/listinfo/aus-soaring
