At 09:24 PM 20/11/03 +1100, you wrote:
If desperate 1. remove cover (have a good fitting X screwdriver as they can
be real tight) and 2. locate the square EPROM at the back of the LCD
display. 3 Remove this IC with a remover using appropiate static earthing.
4. All the leg loops need to come out further from the side of EPROM so it
all makes contact again. 5 Replace EPROM and cover and job is done.
I consider this advice extremely sporty and incredibly gutsy for a service
agent to advise.
I wouldn't do that in our workshop. I'd consider taking the EPROM out,
spraying IPA in the socket and on the EPROM pins and blowing dry with
compressed air and reassembling. If that didn't work I'd let the factory or
agent fix it so he could fix the problem and any screwups caused by trying
to fix the problem.
Mike
Borgelt Instruments - manufacturers of quality soaring instruments
phone Int'l + 61 746 355784
fax Int'l + 61 746 358796
cellphone Int'l + 61 428 355784
Int'l + 61 429 355784
email: [EMAIL PROTECTED]
website: www.borgeltinstruments.com
_______________________________________________
Aus-soaring mailing list
[EMAIL PROTECTED]
http://lists.internode.on.net/mailman/listinfo/aus-soaring
