I don't have a mac, but I found this.
--giac
On 1/3/06, Jorge Schrauwen <[EMAIL PROTECTED]> wrote:
Doesn't seem to do mutch on a x51v...
But i think i didn't format my SD Card Right, I don't have linux
installed atm. (main pc bricked).
So i formatted it on an iBook, selected Unix File System as option.
I guess that isn't ext2 then :(
Jorge
On 1/3/06, JeDi <[EMAIL PROTECTED]> wrote:
> Any succes yet? The kernel boots, but the initrd doesn't seem to
> start. The "echo" lines in the linuxrc file of the initrd should get
> onto the screen, right? It's hard to read cause Fisherss forgot to
> enable bigger fonts in the kernel he built for the x50v.
>
> So this kernel is getting as far as any kernel I've tried so far.
> Could it be that something else is different on x50v? I formatted my
> sd card with an ext2 partition too, and put the rootfs on that, but
> obviously the kernel never tries to mount it. I get the same warning
> about the read-only switch as you.
>
> I hope fisherss uploads the kernel sources soon, so I can experiment
> with some kernel options. Also, I hope we can get a newer kernel
> working (2.6.13), cause a lot has been done with the pxa drivers
> there.
>
> Good luck!
>
> Greetz,
> JeDi
>
>
> On 1/3/06, Angel Sánchez Morales < [EMAIL PROTECTED]> wrote:
> > No no, a SD card, a Sandisk Extreme III of 1GB :)
> >
> >
> > My SD card mounted looks as follows:
> >
> > MeowPC ~ # mount /dev/sda1 /mnt/cardReader/
> > MeowPC ~ # ls /mnt/cardReader/
> > bin evdev.ko linuxrc opt sys usr
> > boot h4000_ts_x50.ko lost+found proc tests var
> > dev home media rootfs tmp x50_rootfs.tar.gz
> > etc lib mnt sbin tsdev.ko
> >
> >
> > Info on mount:
> > /dev/sda1 on /mnt/cardReader type ext2 (rw)
> >
> >
> > And for fdisk:
> >
> > MeowPC ~ # fdisk /dev/sda
> >
> > Command (m for help): p
> >
> > Disk /dev/sda: 1015 MB, 1015808000 bytes
> > 32 heads, 63 sectors/track, 984 cylinders
> > Units = cylinders of 2016 * 512 = 1032192 bytes
> >
> > Device Boot Start End Blocks Id System
> > /dev/sda1 1 984 991840+ 83 Linux
> >
> > Command (m for help):
> >
> >
> >
> > Fisherss wrote:
> > > CF disk? You mean CF card ? It's not supported currently.
> > >
> > > Angel Sánchez Morales wrote:
> > >
> > >> I put mirror mode on so i can see the kernel booting.
> > >> About the sd format i used cfdisk to make a 1gig ext2 filesystem,
> > >> without the boot flag, i stored all the data on the rootfs file.
> > >> Perhaps it doesn't show the gui because i don't have the right
> > >> filesystem :p
> > >>
> > >>
> > >> Fisherss wrote:
> > >>
> > >>> yes, I uploaded it for 8-9 times, the connection always crashed, so I
> > >>> am uploading it onto new server .
> > >>>
> > >>> Angel Sánchez Morales wrote:
> > >>>
> > >>>> In the X window system there's xstroke that recognizes handwritting :p
> > >>>> It's funny to use, i have it on my desktop, but don't use it.
> > >>>>
> > >>>> I was contemplating fisherss webpage when i wondered why he put "3.
> > >>>> (a) For x50v, download this tarball: " and "(b) For x50, download
> > >>>> this tarball: " if the link is the same... and... voilà!
> > >>>> There's a file in
> > >>>> http://axim.narcotize.com/files/beta1/x50v/x50v_rootfs.tar.gz
> > >>>> that is not fully uploaded, it weights 28K and doesn't untargz's
> > >>>> correctly, so i should need that rootfs to boot the x50v.
> > >>>>
> > >>>> Fisherss, can you upload it correctly, or is the other link on your
> > >>>> webpage the correct one?
> > >>>>
> > >>>>
> > >>>>
> > >>>> rada b. wrote:
> > >>>>
> > >>>>> Once X Window server, etc are working then its just a matter of
> > >>>>> cross compiling. If Familiar is based off Gentoo I assume you can
> > >>>>> use portage ebuilds? If so then you can look at
> > >>>>> www.gentoo-portage.com. Some stuff is avalible for arm and other
> > >>>>> stuff that isnt explicitly can be cross-compiled.
> > >>>>>
> > >>>>> */jp <[EMAIL PROTECTED] >/* wrote:
> > >>>>>
> > >>>>> by input i mean japanese input. ie handwriting recognition or
> > >>>>> even just
> > >>>>> standard keyboard input.
> > >>>>> -- _______________________________________________
> > >>>>> Aximx50-port mailing list
> > >>>>> [email protected]
> > >>>>> https://www.handhelds.org/mailman/listinfo/aximx50-port
> > >>>>>
> > >>>>>
> > --
> > _______________________________________________
> > Aximx50-port mailing list
> > [email protected]
> > https://www.handhelds.org/mailman/listinfo/aximx50-port
> >
> --
> _______________________________________________
> Aximx50-port mailing list
> [email protected]
> https://www.handhelds.org/mailman/listinfo/aximx50-port
>
--
~Jorge
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port
-- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
