On 03/16/2018 12:09 AM, Sebastian Suchanek wrote: > Am 15.03.2018 um 21:47 schrieb Dimitri Maziuk: >> On 03/15/2018 03:11 PM, Sebastian Suchanek wrote: >> >>> I just did - unfortunately, with no effect. After restarting the >>> director and letting the backup job run manually, the backup file just >>> got even bigger. >> >> I wonder if you have to run "update volume maxvolbytes=NNN" in bconsole >> in order for it to apply to existing volume. >> [...] > > That did the trick. Thank you!
Yep... Also, when you make these types of configuration changes to a pool which affect volumes, after running the "update pool" command in bconsole, you can apply these settings to all volumes in all pools that were modified with: * update volume fromallpools Hope this helps! Best regards, Bill -- Bill Arlofski http://www.revpol.com/bacula -- Not responsible for anything below this line -- ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
