Bill, thanks for clarification. So the problem remains a mystery, so far. > On 20. Jul 2022, at 21:33, Bill Arlofski via Bacula-users > <bacula-users@lists.sourceforge.net> wrote: > > >>> It will try to connect every 5 seconds until it succeeds. >> Why every 5 seconds? >> The FD config has ReconnectionTime = 40 min >> Let me remove this clause and restart the FD. Maybe it helps. > > > Hello Justin, > > Don't confuse the two different things. > > On startup, the FD will immediately attempt to connect to the Director, and > if it fails, it will keep trying, every 5 seconds. > > > The ReconnectionTime is defined as: ...the connection initiated by the > FileDeamon to the Director will be reinitialized at a regular interval > specified by the ReconnectionTime directive. > > > So, after 40 minutes (the default) the FD will (apparently) drop the > connection and reconnect - at which point it would try every 5 seconds until > it succeeds. > > I of course assume that if a job is running this ReconnectionTime > will/must/should/might be ignored until the next 40 minutes passes, etc. :) > > > Best regards, > Bill > > -- > Bill Arlofski > w...@protonmail.com > _______________________________________________ > Bacula-users mailing list > Bacula-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/bacula-users
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
