Does anyone else have any suggestions? thanks, nomad
On Fri, Jan 20, 2023 at 9:15 AM Lee Damon <l...@uw.edu> wrote: > Ana, Gary, > > The devices were not properly owned. Changing them did not correct the > problem, sadly. (Given the previous hardware was working with the incorrect > ownerships this isn't really surprising to me, though I would have loved > the quick fix had it held.) > > The ownership is now bacula:bacula. > > As you suggest, I'll discard the offline unmount directive entirely (it's > been commented out for all of today's tests). > > The reason I was trying it is, in order to unload the tape after any test > I have to rewoffl it first. From the most recent test: > -- begin excerpt -- > === Autochanger test === > > 3301 Issuing autochanger "loaded" command. > Slot 1 loaded. I am going to unload it. > 3302 Issuing autochanger "unload 1 0" command. > unload status=Bad 268435457 > 3992 Bad autochanger command: /usr/libexec/bacula/mtx-changer > /dev/changer/0 unload 1 /dev/tape/0 0 > 3992 result="Unloading drive 0 into Storage Element 1...Unloading drive 0 > into Storage Element 1...Unloading drive 0 into Storage Element > 1...Unloading drive 0 into Storage Element 1...Unloading drive 0 into > Storage Element 1...mtx: Request Sense: Long Report=yes > ": ERR=Child exited with code 1 > 3303 Issuing autochanger "load 1 0" command. > 3993 Bad autochanger command: /usr/libexec/bacula/mtx-changer > /dev/changer/0 load 1 /dev/tape/0 0 > 3993 result="Drive 0 Full (Storage Element 1 loaded) > ": ERR=Child exited with code 1 > You must correct this error or the Autochanger will not work. > *quit > : || lvd@harrier ~ [103] ; please mtx -f /dev/changer/0 unload 1 > Unloading drive 0 into Storage Element 1...mtx: Request Sense: Long > Report=yes > mtx: Request Sense: Valid Residual=no > mtx: Request Sense: Error Code=70 (Current) > mtx: Request Sense: Sense Key=Illegal Request > mtx: Request Sense: FileMark=no > mtx: Request Sense: EOM=no > mtx: Request Sense: ILI=no > mtx: Request Sense: Additional Sense Code = 53 > mtx: Request Sense: Additional Sense Qualifier = 01 > mtx: Request Sense: Field in Error = 00 > mtx: Request Sense: BPV=no > mtx: Request Sense: Error in CDB=no > mtx: Request Sense: SKSV=yes > mtx: Request Sense: Field Pointer = 00 00 > MOVE MEDIUM from Element Address 256 to 4096 Failed > : || lvd@harrier ~ [104] ; please mt -f /dev/tape/0 rewoffl > : || lvd@harrier ~ [105] ; please mtx -f /dev/changer/0 unload 1 > Unloading drive 0 into Storage Element 1...done > -- end of excerpt -- > > I set debug_log=1 and debug_level=100, this is all that shows up > in /var/spool/bacula/mtx.log: > > 0120-09:00:00.46 0 Parms: /dev/changer/0 loaded 0 /dev/tape/0 0 > 0120-09:00:00.47 0 Doing mtx -f /dev/changer/0 0 -- to find what is loaded > 0120-09:02:04.50 0 Parms: /dev/changer/0 loaded 1 /dev/tape/0 0 > 0120-09:02:04.50 0 Doing mtx -f /dev/changer/0 0 -- to find what is loaded > 0120-09:02:05.86 0 Parms: /dev/changer/0 unload 1 /dev/tape/0 0 > 0120-09:02:05.86 0 Doing mtx -f /dev/changer/0 unload slot=1 drv=0 > 0120-09:02:09.97 0 Doing mtx -f /dev/changer/0 unload slot=1 drv=0 > 0120-09:02:16.81 0 Doing mtx -f /dev/changer/0 unload slot=1 drv=0 > 0120-09:02:21.96 0 Doing mtx -f /dev/changer/0 unload slot=1 drv=0 > 0120-09:02:28.00 0 Doing mtx -f /dev/changer/0 unload slot=1 drv=0 > 0120-09:02:35.01 0 FAIL: mtx -f /dev/changer/0 unload slot=1 drv=0 > 0120-09:02:35.12 0 Parms: /dev/changer/0 load 1 /dev/tape/0 0 > 0120-09:02:35.12 0 Doing mtx -f /dev/changer/0 load slot=1 drv=0 > 0120-09:02:36.40 0 FAIL: mtx -f /dev/changer/0 load slot=1 drv=0 > > That is repeated for every run of /usr/bin/sudo /sbin/btape -c > /etc/bacula/bacula-sd.conf /dev/tape/0 > > Thank you both for the pointers! > > nomad >
_______________________________________________ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users