the phy reset neet to be done before the fec driver is registered as we accesst the phy at the fec probe time
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]> --- arch/arm/boards/freescale-mx53-loco/board.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/boards/freescale-mx53-loco/board.c b/arch/arm/boards/freescale-mx53-loco/board.c index 45c05c2..216d26a 100644 --- a/arch/arm/boards/freescale-mx53-loco/board.c +++ b/arch/arm/boards/freescale-mx53-loco/board.c @@ -187,6 +187,7 @@ static int loco_devices_init(void) { imx53_iim_register_fec_ethaddr(); + loco_fec_reset(); imx53_add_fec(&fec_info); imx53_add_mmc0(&loco_sd1_data); imx53_add_mmc2(&loco_sd3_data); @@ -196,8 +197,6 @@ static int loco_devices_init(void) if (IS_ENABLED(CONFIG_USB_EHCI)) loco_ehci_init(); - loco_fec_reset(); - set_silicon_rev(imx_silicon_revision()); armlinux_set_bootparams((void *)0x70000100); -- 1.7.10.4 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
