On 12:51 Thu 15 Nov , Jean-Christophe PLAGNIOL-VILLARD wrote:
> the phy reset neet to be done before the fec driver is registered
> as we accesst the phy at the fec probe time
>
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
> ---
forget this one this was send twice
Best Regards,
J.
> arch/arm/boards/freescale-mx53-loco/board.c | 3 +--
> 1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/arch/arm/boards/freescale-mx53-loco/board.c
> b/arch/arm/boards/freescale-mx53-loco/board.c
> index 45c05c2..216d26a 100644
> --- a/arch/arm/boards/freescale-mx53-loco/board.c
> +++ b/arch/arm/boards/freescale-mx53-loco/board.c
> @@ -187,6 +187,7 @@ static int loco_devices_init(void)
> {
>
> imx53_iim_register_fec_ethaddr();
> + loco_fec_reset();
> imx53_add_fec(&fec_info);
> imx53_add_mmc0(&loco_sd1_data);
> imx53_add_mmc2(&loco_sd3_data);
> @@ -196,8 +197,6 @@ static int loco_devices_init(void)
> if (IS_ENABLED(CONFIG_USB_EHCI))
> loco_ehci_init();
>
> - loco_fec_reset();
> -
> set_silicon_rev(imx_silicon_revision());
>
> armlinux_set_bootparams((void *)0x70000100);
> --
> 1.7.10.4
>
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
