This allows to load all the lowlevel init code, including the
uncompressor, inside SRAM and not just the bare init part. This is
useful when pbl is used as a first-stage bootloader but is loaded by an
external firmware.
Signed-off-by: David Vincent <freesili...@gmail.com>
---
arch/arm/lib/pbl.lds.S | 4 ++--
common/Kconfig | 16 ++++++++++++++--
include/asm-generic/barebox.lds.h | 14 +++++++++++++-
pbl/Kconfig | 7 +++++++
4 files changed, 36 insertions(+), 5 deletions(-)
diff --git a/arch/arm/lib/pbl.lds.S b/arch/arm/lib/pbl.lds.S
index 0954c89..34c0cb3 100644
--- a/arch/arm/lib/pbl.lds.S
+++ b/arch/arm/lib/pbl.lds.S
@@ -50,11 +50,11 @@ SECTIONS
*(.text*)
}
+ BAREBOX_PBL_SIZE
+
/* Discard unwind if enable in barebox */
/DISCARD/ : { *(.ARM.ex*) }
- BAREBOX_BARE_INIT_SIZE
-
. = ALIGN(4);
.rodata : { *(.rodata*) }
diff --git a/common/Kconfig b/common/Kconfig
index 8af7ec1..e067127 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -145,13 +145,25 @@ config BAREBOX_MAX_IMAGE_SIZE
help
Define the maximum size of barebox
+config BAREBOX_MAX_PBL_SIZE
+ depends on PBL_IMAGE && LOAD_PBL_SRAM
+ prompt "Maximum pre-bootloader size"
+ hex
+ default 0xffffffff
+ help
+ Define the maximum size of pbl
+ this will allow your pbl to fit in SRAM as example
+ ARCH can overwrite it via ARCH_BAREBOX_MAX_PBL_SIZE
+
config BAREBOX_MAX_BARE_INIT_SIZE
- prompt "Maximum bare_init size"
+ prompt "Maximum bare_init size" if !LOAD_PBL_SRAM
hex
+ range 0x0 BAREBOX_MAX_PBL_SIZE if LOAD_PBL_SRAM
+ default BAREBOX_MAX_PBL_SIZE if LOAD_PBL_SRAM
default 0xffffffff
help
Define the maximum size of bare_init
- this will allow your bare_init will fit in SRAM as example
+ this will allow your bare_init to fit in SRAM as example
ARCH can overwrite it via ARCH_BAREBOX_MAX_BARE_INIT_SIZE
config HAVE_CONFIGURABLE_MEMORY_LAYOUT
diff --git a/include/asm-generic/barebox.lds.h
b/include/asm-generic/barebox.lds.h
index 6d3a69e..10b0885 100644
--- a/include/asm-generic/barebox.lds.h
+++ b/include/asm-generic/barebox.lds.h
@@ -60,10 +60,22 @@ CONFIG_ARCH_BAREBOX_MAX_BARE_INIT_SIZE <
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE
#define MAX_BARE_INIT_SIZE CONFIG_BAREBOX_MAX_BARE_INIT_SIZE
#endif
+#if defined(CONFIG_ARCH_BAREBOX_MAX_PBL_SIZE) && \
+CONFIG_ARCH_BAREBOX_MAX_PBL_SIZE < CONFIG_BAREBOX_MAX_PBL_SIZE
+#define MAX_PBL_SIZE CONFIG_ARCH_BAREBOX_MAX_PBL_SIZE
+#else
+#define MAX_PBL_SIZE CONFIG_BAREBOX_MAX_PBL_SIZE
+#endif
+
#include <linux/stringify.h>
/* use 2 ASSERT because ld can not accept '"size" "10"' format */
#define BAREBOX_BARE_INIT_SIZE \
_barebox_bare_init_size = __bare_init_end - _text; \
ASSERT(_barebox_bare_init_size < MAX_BARE_INIT_SIZE, "Barebox bare_init
size > ") \
- ASSERT(_barebox_bare_init_size < MAX_BARE_INIT_SIZE,
__stringify(MAX_BARE_INIT_SIZE)) \
+ ASSERT(_barebox_bare_init_size < MAX_BARE_INIT_SIZE,
__stringify(MAX_BARE_INIT_SIZE))
+#define BAREBOX_PBL_SIZE \
+ _barebox_pbl_size = __bss_start - _text; \
+ ASSERT(MAX_BARE_INIT_SIZE <= MAX_PBL_SIZE, "bare_init cannot be bigger
than pbl") \
+ ASSERT(_barebox_pbl_size < MAX_PBL_SIZE, "Barebox pbl size > ") \
+ ASSERT(_barebox_pbl_size < MAX_PBL_SIZE, __stringify(MAX_PBL_SIZE))
diff --git a/pbl/Kconfig b/pbl/Kconfig
index dc31357..1edc2d1 100644
--- a/pbl/Kconfig
+++ b/pbl/Kconfig
@@ -34,6 +34,13 @@ config PBL_FORCE_PIGGYDATA_COPY
if PBL_IMAGE
+config LOAD_PBL_SRAM
+ bool "Load pbl in SRAM"
+ help
+ Load the whole content of the pbl binary into SRAM. This is useful if
you
+ use the pbl as a first stage bootloader but cannot load the whole
binary
+ at the same time.
+
config PBL_RELOCATABLE
depends on ARM
bool "relocatable pbl image"
--
1.7.10.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
