On 10:06 Fri 31 Jan , David Vincent wrote:
> This allows to load all the lowlevel init code, including the
> uncompressor, inside SRAM and not just the bare init part. This is
> useful when pbl is used as a first-stage bootloader but is loaded by an
> external firmware.
>
> Signed-off-by: David Vincent <freesili...@gmail.com>
> ---
> arch/arm/lib/pbl.lds.S | 4 ++--
> common/Kconfig | 16 ++++++++++++++--
> include/asm-generic/barebox.lds.h | 14 +++++++++++++-
> pbl/Kconfig | 7 +++++++
> 4 files changed, 36 insertions(+), 5 deletions(-)
>
> diff --git a/arch/arm/lib/pbl.lds.S b/arch/arm/lib/pbl.lds.S
> index 0954c89..34c0cb3 100644
> --- a/arch/arm/lib/pbl.lds.S
> +++ b/arch/arm/lib/pbl.lds.S
> @@ -50,11 +50,11 @@ SECTIONS
> *(.text*)
> }
>
> + BAREBOX_PBL_SIZE
> +
> /* Discard unwind if enable in barebox */
> /DISCARD/ : { *(.ARM.ex*) }
>
> - BAREBOX_BARE_INIT_SIZE
> -
nack you change the binary format you can add an information but can not
change the format
> . = ALIGN(4);
> .rodata : { *(.rodata*) }
>
> diff --git a/common/Kconfig b/common/Kconfig
> index 8af7ec1..e067127 100644
> --- a/common/Kconfig
> +++ b/common/Kconfig
> @@ -145,13 +145,25 @@ config BAREBOX_MAX_IMAGE_SIZE
> help
> Define the maximum size of barebox
>
> +config BAREBOX_MAX_PBL_SIZE
> + depends on PBL_IMAGE && LOAD_PBL_SRAM
> + prompt "Maximum pre-bootloader size"
> + hex
> + default 0xffffffff
> + help
> + Define the maximum size of pbl
> + this will allow your pbl to fit in SRAM as example
> + ARCH can overwrite it via ARCH_BAREBOX_MAX_PBL_SIZE
> +
> config BAREBOX_MAX_BARE_INIT_SIZE
> - prompt "Maximum bare_init size"
> + prompt "Maximum bare_init size" if !LOAD_PBL_SRAM
you can set it in all case
> hex
> + range 0x0 BAREBOX_MAX_PBL_SIZE if LOAD_PBL_SRAM
> + default BAREBOX_MAX_PBL_SIZE if LOAD_PBL_SRAM
> default 0xffffffff
> help
> Define the maximum size of bare_init
> - this will allow your bare_init will fit in SRAM as example
> + this will allow your bare_init to fit in SRAM as example
different patch
> ARCH can overwrite it via ARCH_BAREBOX_MAX_BARE_INIT_SIZE
>
> config HAVE_CONFIGURABLE_MEMORY_LAYOUT
> diff --git a/include/asm-generic/barebox.lds.h
> b/include/asm-generic/barebox.lds.h
> index 6d3a69e..10b0885 100644
> --- a/include/asm-generic/barebox.lds.h
> +++ b/include/asm-generic/barebox.lds.h
> @@ -60,10 +60,22 @@ CONFIG_ARCH_BAREBOX_MAX_BARE_INIT_SIZE <
> CONFIG_BAREBOX_MAX_BARE_INIT_SIZE
> #define MAX_BARE_INIT_SIZE CONFIG_BAREBOX_MAX_BARE_INIT_SIZE
> #endif
>
> +#if defined(CONFIG_ARCH_BAREBOX_MAX_PBL_SIZE) && \
> +CONFIG_ARCH_BAREBOX_MAX_PBL_SIZE < CONFIG_BAREBOX_MAX_PBL_SIZE
> +#define MAX_PBL_SIZE CONFIG_ARCH_BAREBOX_MAX_PBL_SIZE
> +#else
> +#define MAX_PBL_SIZE CONFIG_BAREBOX_MAX_PBL_SIZE
> +#endif
> +
> #include <linux/stringify.h>
> /* use 2 ASSERT because ld can not accept '"size" "10"' format */
> #define BAREBOX_BARE_INIT_SIZE \
> _barebox_bare_init_size = __bare_init_end - _text; \
> ASSERT(_barebox_bare_init_size < MAX_BARE_INIT_SIZE, "Barebox bare_init
> size > ") \
> - ASSERT(_barebox_bare_init_size < MAX_BARE_INIT_SIZE,
> __stringify(MAX_BARE_INIT_SIZE)) \
> + ASSERT(_barebox_bare_init_size < MAX_BARE_INIT_SIZE,
> __stringify(MAX_BARE_INIT_SIZE))
different patch
>
> +#define BAREBOX_PBL_SIZE \
> + _barebox_pbl_size = __bss_start - _text; \
> + ASSERT(MAX_BARE_INIT_SIZE <= MAX_PBL_SIZE, "bare_init cannot be bigger
> than pbl") \
> + ASSERT(_barebox_pbl_size < MAX_PBL_SIZE, "Barebox pbl size > ") \
> + ASSERT(_barebox_pbl_size < MAX_PBL_SIZE, __stringify(MAX_PBL_SIZE))
> diff --git a/pbl/Kconfig b/pbl/Kconfig
> index dc31357..1edc2d1 100644
> --- a/pbl/Kconfig
> +++ b/pbl/Kconfig
> @@ -34,6 +34,13 @@ config PBL_FORCE_PIGGYDATA_COPY
>
> if PBL_IMAGE
>
> +config LOAD_PBL_SRAM
> + bool "Load pbl in SRAM"
> + help
> + Load the whole content of the pbl binary into SRAM. This is useful if
> you
> + use the pbl as a first stage bootloader but cannot load the whole
> binary
> + at the same time.
> +
> config PBL_RELOCATABLE
> depends on ARM
> bool "relocatable pbl image"
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
