Pin 0x74 (gpmc_wpn.gpio0_30) is not used on the phyCORE SOM.
Signed-off-by: Wadim Egorov <[email protected]>
---
arch/arm/dts/am335x-phytec-phycore-som.dtsi | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/arch/arm/dts/am335x-phytec-phycore-som.dtsi
b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
index f1bcb8b..7e099a2 100644
--- a/arch/arm/dts/am335x-phytec-phycore-som.dtsi
+++ b/arch/arm/dts/am335x-phytec-phycore-som.dtsi
@@ -75,7 +75,6 @@
0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad6.gpmc_ad6 */
0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_ad7.gpmc_ad7 */
0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /*
gpmc_wait0.gpmc_wait0 */
- 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /*
gpmc_wpn.gpio0_30 */
0x7c (PIN_OUTPUT | MUX_MODE0) /*
gpmc_csn0.gpmc_csn0 */
0x90 (PIN_OUTPUT | MUX_MODE0) /*
gpmc_advn_ale.gpmc_advn_ale */
0x94 (PIN_OUTPUT | MUX_MODE0) /*
gpmc_oen_ren.gpmc_oen_ren */
--
1.7.0.4
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
