That chip specifies read access uising EERD via use_eerd, which means that none of the more "advanced" EEPROM parameters will be used for reads, so remove them.
Signed-off-by: Andrey Smirnov <[email protected]> --- drivers/net/e1000/eeprom.c | 7 ------- 1 file changed, 7 deletions(-) diff --git a/drivers/net/e1000/eeprom.c b/drivers/net/e1000/eeprom.c index e4ef5f9..63e84c1 100644 --- a/drivers/net/e1000/eeprom.c +++ b/drivers/net/e1000/eeprom.c @@ -369,13 +369,6 @@ int32_t e1000_init_eeprom_params(struct e1000_hw *hw) break; case e1000_80003es2lan: eeprom->type = e1000_eeprom_spi; - eeprom->opcode_bits = 8; - eeprom->delay_usec = 1; - if (eecd & E1000_EECD_ADDR_BITS) - eeprom->address_bits = 16; - else - eeprom->address_bits = 8; - eeprom->use_eerd = true; break; case e1000_igb: -- 2.5.5 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
