This is taken from the Linux driver
Signed-off-by: Uwe Kleine-König <[email protected]>
---
drivers/net/phy/marvell.c | 78 +++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 76 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index d504cf85a1da..6bb50a3a1f4c 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -133,6 +133,80 @@ static int marvell_read_status(struct phy_device *phydev)
return 0;
}
+static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
+{
+ return phydev->interface >= PHY_INTERFACE_MODE_RGMII &&
+ phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID;
+};
+
+static int m88e1121_config_aneg(struct phy_device *phydev)
+{
+ int err, oldpage, mscr;
+
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1121_PHY_MSCR_PAGE);
+ if (err < 0)
+ return err;
+
+ if (phy_interface_is_rgmii(phydev)) {
+
+ mscr = phy_read(phydev, MII_88E1121_PHY_MSCR_REG) &
+ MII_88E1121_PHY_MSCR_DELAY_MASK;
+
+ if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
+ mscr |= (MII_88E1121_PHY_MSCR_RX_DELAY |
+ MII_88E1121_PHY_MSCR_TX_DELAY);
+ else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
+ mscr |= MII_88E1121_PHY_MSCR_RX_DELAY;
+ else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
+ mscr |= MII_88E1121_PHY_MSCR_TX_DELAY;
+
+ err = phy_write(phydev, MII_88E1121_PHY_MSCR_REG, mscr);
+ if (err < 0)
+ return err;
+ }
+
+ phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_AUTO_CROSS);
+ if (err < 0)
+ return err;
+
+ return genphy_config_aneg(phydev);
+}
+
+static int m88e1318_config_aneg(struct phy_device *phydev)
+{
+ int err, oldpage, mscr;
+
+ oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
+ MII_88E1121_PHY_MSCR_PAGE);
+ if (err < 0)
+ return err;
+
+ mscr = phy_read(phydev, MII_88E1318S_PHY_MSCR1_REG);
+ mscr |= MII_88E1318S_PHY_MSCR1_PAD_ODD;
+
+ err = phy_write(phydev, MII_88E1318S_PHY_MSCR1_REG, mscr);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
+ if (err < 0)
+ return err;
+
+ return m88e1121_config_aneg(phydev);
+}
+
static int m88e1540_config_init(struct phy_device *phydev)
{
u16 reg;
@@ -244,7 +318,7 @@ static struct phy_driver marvell_drivers[] = {
.drv.name = "Marvell 88E1121R",
.features = PHY_GBIT_FEATURES,
.config_init = &m88e1121_config_init,
- .config_aneg = &genphy_config_aneg,
+ .config_aneg = &m88e1121_config_aneg,
.read_status = &marvell_read_status,
},
{
@@ -253,7 +327,7 @@ static struct phy_driver marvell_drivers[] = {
.drv.name = "Marvell 88E1318S",
.features = PHY_GBIT_FEATURES,
.config_init = &m88e1318s_config_init,
- .config_aneg = &genphy_config_aneg,
+ .config_aneg = &m88e1318_config_aneg,
.read_status = &marvell_read_status,
},
{
--
2.11.0
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
