Add BBU configuration to allow programming Barebox to eMMC. Normally factory U-Boot is shipped in mmc0.boot0, so us using user partition for Barebox should allow those two to coexist.
Signed-off-by: Andrey Smirnov <[email protected]> --- arch/arm/boards/nxp-imx8mq-evk/board.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boards/nxp-imx8mq-evk/board.c b/arch/arm/boards/nxp-imx8mq-evk/board.c index d93e21da1..868c25ebb 100644 --- a/arch/arm/boards/nxp-imx8mq-evk/board.c +++ b/arch/arm/boards/nxp-imx8mq-evk/board.c @@ -21,6 +21,7 @@ #include <init.h> #include <asm/memory.h> #include <linux/sizes.h> +#include <mach/bbu.h> static int imx8mq_evk_mem_init(void) { @@ -39,6 +40,8 @@ static int nxp_imx8mq_evk_init(void) barebox_set_hostname("imx8mq-evk"); + imx8mq_bbu_internal_mmc_register_handler("eMMC", "/dev/mmc0", 0); + return 0; } device_initcall(nxp_imx8mq_evk_init); -- 2.17.1 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
