Since commit 51061a9884a3 ("mtd: nand: nand_mxs: Add subpage read
support") the ecc_read_page and ecc_write_page page_size can be differ.
Because during ecc_read_page the page_size() is based on the ecc
calculation. Unlike to the ecc_write_page() which uses the nand
writesize and oobsize information.

This commit factor out the page size calculation during ecc_read_page to
a helper function. So we can reuse it during ecc_write_page().

Signed-off-by: Marco Felsch <[email protected]>
---
 drivers/mtd/nand/nand_mxs.c | 27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/mtd/nand/nand_mxs.c b/drivers/mtd/nand/nand_mxs.c
index c3b07aa3f6..762c751fa7 100644
--- a/drivers/mtd/nand/nand_mxs.c
+++ b/drivers/mtd/nand/nand_mxs.c
@@ -688,6 +688,25 @@ static uint8_t mxs_nand_read_byte(struct mtd_info *mtd)
        return buf;
 }
 
+/*
+ * Determine the page size including user data + ecc data
+ */
+static unsigned int mxs_nand_get_page_size(struct mtd_info *mtd,
+                                          unsigned int bytes)
+{
+       unsigned int eccstrength, nchunks, pagesize;
+
+       eccstrength = mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize);
+
+       bytes = roundup(bytes, MXS_NAND_CHUNK_DATA_CHUNK_SIZE);
+       nchunks = mxs_nand_ecc_chunk_cnt(bytes);
+       pagesize =  MXS_NAND_METADATA_SIZE;
+       pagesize += MXS_NAND_CHUNK_DATA_CHUNK_SIZE * nchunks;
+       pagesize += DIV_ROUND_UP(13 * eccstrength * nchunks, 8);
+
+       return pagesize;
+}
+
 static void mxs_nand_config_bch(struct mtd_info *mtd, int readlen)
 {
        struct nand_chip *nand = mtd->priv;
@@ -728,15 +747,11 @@ static int __mxs_nand_ecc_read_page(struct mtd_info *mtd, 
struct nand_chip *nand
        uint32_t corrected = 0, failed = 0;
        uint8_t *status;
        unsigned int  max_bitflips = 0;
-       int i, ret, readtotal, nchunks, eccstrength;
-
-       eccstrength = mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize);
+       int i, ret, readtotal, nchunks;
 
        readlen = roundup(readlen, MXS_NAND_CHUNK_DATA_CHUNK_SIZE);
        nchunks = mxs_nand_ecc_chunk_cnt(readlen);
-       readtotal =  MXS_NAND_METADATA_SIZE;
-       readtotal += MXS_NAND_CHUNK_DATA_CHUNK_SIZE * nchunks;
-       readtotal += DIV_ROUND_UP(13 * eccstrength * nchunks, 8);
+       readtotal = mxs_nand_get_page_size(mtd, readlen);
 
        mxs_nand_config_bch(mtd, readtotal);
 
-- 
2.20.1


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Reply via email to