Signed-off-by: Sascha Hauer <[email protected]>
---
arch/arm/boards/phytec-som-imx6/board.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boards/phytec-som-imx6/board.c
b/arch/arm/boards/phytec-som-imx6/board.c
index 36c4d9a78b..1e515a093a 100644
--- a/arch/arm/boards/phytec-som-imx6/board.c
+++ b/arch/arm/boards/phytec-som-imx6/board.c
@@ -14,6 +14,7 @@
#include <gpio.h>
#include <init.h>
#include <of.h>
+#include <deep-probe.h>
#include <i2c/i2c.h>
#include <mach/bbu.h>
#include <platform_data/eth-fec.h>
@@ -110,6 +111,10 @@ static int phycore_da9062_setup_buck_mode(void)
if (!pmic_np)
return -ENODEV;
+ ret = of_device_ensure_probed(pmic_np);
+ if (ret)
+ return ret;
+
adapter = of_find_i2c_adapter_by_node(pmic_np->parent);
if (!adapter)
return -ENODEV;
@@ -161,6 +166,10 @@ static int physom_imx6_probe(struct device_d *dev)
unsigned flags = brd->flags;
if (flags & IS_PHYFLEX) {
+ ret = of_devices_ensure_probed_by_property("gpio-controller");
+ if (ret)
+ return ret;
+
phyflex_err006282_workaround();
pfla02_module_revision = get_module_rev();
@@ -358,3 +367,5 @@ static struct driver_d physom_imx6_driver = {
};
postcore_platform_driver(physom_imx6_driver);
+
+BAREBOX_DEEP_PROBE_ENABLE(physom_imx6_match);
--
2.29.2
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
