From: Marco Felsch <[email protected]> Convert to board driver and explicitly request the required gpio resources instead of relying on their existence based on the initcall level.
Signed-off-by: Marco Felsch <[email protected]> Link: https://lore.pengutronix.de/[email protected] Signed-off-by: Sascha Hauer <[email protected]> --- .../boards/freescale-mx6-sabrelite/board.c | 58 ++++++++++--------- 1 file changed, 32 insertions(+), 26 deletions(-) diff --git a/arch/arm/boards/freescale-mx6-sabrelite/board.c b/arch/arm/boards/freescale-mx6-sabrelite/board.c index 1b39ef82c6..f6eac4c0f3 100644 --- a/arch/arm/boards/freescale-mx6-sabrelite/board.c +++ b/arch/arm/boards/freescale-mx6-sabrelite/board.c @@ -13,7 +13,9 @@ #include <mach/bbu.h> #include <asm/armlinux.h> #include <generated/mach-types.h> +#include <of.h> #include <partition.h> +#include <deep-probe.h> #include <linux/phy.h> #include <asm/io.h> #include <asm/mmu.h> @@ -98,10 +100,6 @@ static int sabrelite_ksz9021rn_setup(void) { int ret; - if (!of_machine_is_compatible("fsl,imx6q-sabrelite") && - !of_machine_is_compatible("fsl,imx6dl-sabrelite")) - return 0; - mxc_iomux_v3_setup_multiple_pads(sabrelite_enet_gpio_pads, ARRAY_SIZE(sabrelite_enet_gpio_pads)); @@ -118,11 +116,6 @@ static int sabrelite_ksz9021rn_setup(void) return 0; } -/* - * Do this before the fec initializes but after our - * gpios are available. - */ -fs_initcall(sabrelite_ksz9021rn_setup); static void sabrelite_ehci_init(void) { @@ -132,11 +125,22 @@ static void sabrelite_ehci_init(void) gpio_set_value(IMX_GPIO_NR(7, 12), 1); } -static int sabrelite_devices_init(void) +static int sabrelite_probe(struct device_d *dev) { - if (!of_machine_is_compatible("fsl,imx6q-sabrelite") && - !of_machine_is_compatible("fsl,imx6dl-sabrelite")) - return 0; + int ret; + + phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, + ksz9021rn_phy_fixup); + + barebox_set_hostname("sabrelite"); + + ret = of_devices_ensure_probed_by_property("gpio-controller"); + if (ret) + return ret; + + ret = sabrelite_ksz9021rn_setup(); + if (ret) + return ret; sabrelite_ehci_init(); @@ -147,19 +151,21 @@ static int sabrelite_devices_init(void) return 0; } -device_initcall(sabrelite_devices_init); - -static int sabrelite_coredevices_init(void) -{ - if (!of_machine_is_compatible("fsl,imx6q-sabrelite") && - !of_machine_is_compatible("fsl,imx6dl-sabrelite")) - return 0; +static const struct of_device_id sabrelite_match[] = { + { + .compatible = "fsl,imx6q-sabrelite", + }, { + .compatible = "fsl,imx6dl-sabrelite", + }, + { /* Sentinel */ }, +}; - phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, - ksz9021rn_phy_fixup); +static struct driver_d sabrelite_driver = { + .name = "physom-imx6", + .probe = sabrelite_probe, + .of_compatible = sabrelite_match, +}; - barebox_set_hostname("sabrelite"); +postcore_platform_driver(sabrelite_driver); - return 0; -} -coredevice_initcall(sabrelite_coredevices_init); +BAREBOX_DEEP_PROBE_ENABLE(sabrelite_match); -- 2.29.2 _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
