Hi,
On 7/30/25 11:16, Ivaylo Ivanov wrote:
> On 7/30/25 11:48, Ahmad Fatoum wrote:
>> Hi Ivaylo,
>>
>> On 7/29/25 22:36, Ivaylo Ivanov wrote:
>>> Add support for Samsung Galaxy S20 5G, based on exynos990, to the
>>> current samsung board support. This platform, just like exynos8895,
>>> needs a bit to be set in order to allow the framebuffer to refresh.
>>>
>> Oh, a shame that I sold the old S20 FE I had. :/
>> I still have a rooted S10e though. I should give this a try when I have
>> time.
>
> Heh, I was thinking about getting an s10e to bring up mainline linux on it,
> but I do have quite a lot of devices to work on right now. At the very least,
> I expect to throw in support for 7580 and 8890 in the future for both
> mainline linux and barebox. The plan ideally will be to bring up support for
> exynos7580 in barebox to a decent state, with mmc and usb working at least.
> S20 series are decently supported, but nothing exciting yet.
Cool stuff. Looking forward to it. :-)
> Another qustion: are there any plans to support booting fit images from an
> address in ram instead of a file? I suspect porting over all the ufs stuff
> from
> linux will be a hassle
It's something we will want sooner or later, but yes, it will likely be
involved.
> , so for S20 (which does not have an sd card slot, only ufs)
> booting a fit image that s-boot has loaded into ram for us might be neat.
> As far as I've seen, only "go" can do that, but not "bootm".
$ addpart /dev/ram0 0x1000@0x1000(fit)
$ bootm /dev/ram0.fit
would've been the workaround so far.
Since the fuzzing infrastructure has been merged, we also have
ramdisk_init, which sets up a block device on top of a memory buffer
without block layer caching. I think that's sufficient to implement
losetup(8), which would go beyond addpart and even allow mounting file
systems from the loop device.
Cheers,
Ahmad
>
> Best regards,
> Ivaylo
>
>>
>>> diff --git a/arch/arm/dts/exynos990-x1s.dts b/arch/arm/dts/exynos990-x1s.dts
>>> new file mode 100644
>>> index 00000000..19d59eaa
>>> --- /dev/null
>>> +++ b/arch/arm/dts/exynos990-x1s.dts
>>> @@ -0,0 +1,13 @@
>>> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
>>> +/*
>>> + * Samsung Galaxy S20 5G (x1s/SM-G981B) barebox device tree source
>>> + *
>>> + * Copyright (c) 2025, Ivaylo Ivanov <ivo.ivanov.ivan...@gmail.com>
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include <arm64/exynos/exynos990-x1s.dts>
>>> +
>>> +/ {
>>> + barebox,disable-deep-probe;
>> Same comment: we want deep probe as default eventually. Did you run into
>> problems without this?
>>
>> Cheers,
>> Ahmad
>>
>>> +};
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
