More info: If I run this:
# mt -f /dev/tape/by-id/scsi-3500308c09d3ab000-nst status
SCSI 2 tape drive:
File number=0, block number=0, partition=0.
Tape block size 0 bytes. Density code 0x46 (LTO-4).
Soft error count since last status=0
General status bits on (41010000):
BOT ONLINE IM_REP_EN
Which is correct for the drive.
If I run this:
# mtx -f /dev/tape/by-id/scsi-1ADIC_A0C0057818_LLA inquiry
Product Type: Medium Changer
Vendor ID: 'ADIC '
Product ID: 'Scalar i500 '
Revision: '572G'
Attached Changer API: No
# mtx -f /dev/tape/by-id/scsi-1ADIC_A0C0048024_LLA inquiry
Product Type: Medium Changer
Vendor ID: 'ADIC '
Product ID: 'Scalar i500 '
Revision: '585G'
Attached Changer API: No
This is correct for the autochanger.
But if I try to mount a tape in that drive, I get this:
*mount
The defined Storage resources are:
1: File
2: tape
3: tape2
Select Storage resource (1-3): 3
Select Drive:
1: Drive 0
2: Drive 1
Select drive (1-2): 1
Enter autochanger slot:
Connecting to Storage daemon tape2 at gideon2.wycliffe.org:9103 ...
3999 Device "Autochanger1" not found or could not be opened.
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to bareos-users+unsubscr...@googlegroups.com.
To post to this group, send email to bareos-users@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
