In the "Device" documentation, I found this line: Changer Device = <Strname>
The specified name-string must be the generic SCSI device name of the autochanger that corresponds to the normal read/write Archive Device specified in the Device resource. This generic SCSI device name should be specified if you have an autochanger or if you have a standard tape drive and want to use the Alert Command (see below). For example, on Linux systems, for an Archive Device name of /dev/nst0, you would specify /dev/sg0 for the Changer Device name. I'm not using the generic name but what the fellow before me was using: /dev/tape/by-id/scsi-3500308c09d3ab000-nst I will try the "generic" name when some backups finish. -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to bareos-users+unsubscr...@googlegroups.com. To post to this group, send email to bareos-users@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
