Your next option would be to run tcpdump or wireshark on both ends
of the connection (listen on the openvpn virtual network device
tun or tap) to see what packets are going forth and back.
If you use tcpdump you can add the -s 0 (for full packets) and -w
filename.cap. Then you can inspect the full packets by loading
them into wireshark.
Best,
Arjen.
On 2016-02-25 11:47, Marcin
Krzyżanowski wrote:
Hi Jörg,
tryed that already, aber funktioniert.
From fd to dir:
root@:~# telnet 10.8.0.6 9101
Trying 10.8.0.6...
Connected to 10.8.0.6.
Escape character is '^]'.
from dir to fd:
root@bananapi ~ # telnet 10.8.0.1 9102
Trying 10.8.0.1...
Connected to 10.8.0.1.
Escape character is '^]'.
Deshalb habe ich keine Idee was geht nicht.
Grusse
Marcin
W dniu czwartek, 25 lutego 2016 11:06:52 UTC+1 użytkownik Jörg Steffens napisał:
Hi,
what happens, if you try to connect via telnet from the director to the
client? Just to test if the IP and port are reachable:
telnet 10.8.0.1 9102
If you receive
telnet: Unable to connect to remote host: Connection refused
or
telnet: Unable to connect to remote host: Connection timed out
then it is a problem with your network, independent of Bareos.
regards,
Jörg
Am 25.02.2016 um 09:33 schrieb Marcin Krzyżanowski:
Hi,
I've installed Bareos (dir, fd, sd) on bananian (banana pi pro) that is
connecting to a vps in internet over openvpn to bareos-fd to make the backup.
Since the vps in public I've installed there also FW but opened ports 9101,
9102, 9103 for communication with bareos-dir/sd/fd.
When I enter thebconsole and check the status of client - I receive:
"Connecting to Client kfamVps at 10.8.0.1:9102"
"Failed to connect to Client kfamVps."
on the LH the client connects and responds to dir.
I've made som tcp snoffin on openvpn interface and the communication is working
ok - the packets are arriving it's destination.
what can be the issue?
I've triplechecked the passwords, ip's and so on.
Below I'm putting the conf's:
vps-fd - not working:
Director {
Name = bananapi-dir
Password = "Nmcwd0"
}
Director {
Name = bananapi-mon
Password = "h9IWNaH7RtpuGveKyQvJaxhr95lpifUKH6qo2OWTukYs"
Monitor = yes
}
FileDaemon { # this is me
Name = kfamVps
Maximum Concurrent Jobs = 2
}
Messages {
Name = Standard
director = bananapi-dir = all, !skipped, !restored
}
director's conf:
Director { # define myself
Name = bananapi-dir
QueryFile = "/usr/lib/bareos/scripts/query.sql"
Maximum Concurrent Jobs = 50
Password = "nUsGr3RMWxvhQMWU2a6/d4s5HKJcTGEC7S0kx8w2jEPI" # Console
password
Messages = Daemon
Auditing = yes
}
Client {
Name = kfamVps
Address = 10.8.0.1
Password = "Nmcwd0"
File Retention = 10 days
Job Retention = 3 months
AutoPrune = no
}
can I debug somegow where the communication is failing?
in bconsole there is only this info:
Passwords or names not the same or
Maximum Concurrent Jobs exceeded on the FD or
FD networking messed up (restart daemon).
Regards
Marcin
--
Jörg Steffens [email protected]
Bareos GmbH & Co. KG Phone: +49 221 630693-91
http://www.bareos.com Fax: +49 221 630693-10
Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646
Komplementär: Bareos Verwaltungs-GmbH
Geschäftsführer:
S. Dühr, M. Außendorf, Jörg Steffens, P. Storz, M. v. Wieringen
