I'm not so sure if that is the network issue. I've reinstalled today the bareos server. On lh works like charm. But on remote nothing. Still problems. What is the minimum cfg for the client and dir options?
Bye M czw., 25 lut 2016, 13:11 Arjen Van Drie użytkownik < [email protected]> napisał: > > Sorry, can't do that. > > Best, > Arjen. > > > On 2016-02-25 12:57, Marcin Krzyżanowski wrote: > > W dniu czwartek, 25 lutego 2016 12:50:10 UTC+1 użytkownik Arjen Van Drie > napisał: > > tcpdump requires knowledge of TCP packets. It > would take far too much time for me to explain that. If you don't > have that knowledge then tcpdump might not be for you. > > > > Other options would be: > > > > - try to copy (scp, ftp, http or rsync) a large file over your > openvpn connection and see if it times out at a certain point > > - run a ping to the remote host for a couple of hours and see if > you have packet loss > > - monitor your remote host over openvpn using some monitoring tool > such as Nagios > > - check the bareos log files to find possible anomalies > > > > HTH > > > > Arjen > > > > > > > On 2016-02-25 12:40, Marcin > Krzyżanowski wrote: > > > > W dniu czwartek, 25 lutego 2016 12:22:30 UTC+1 użytkownik Arjen Van > Drie napisał: > > > Your next option would be to run tcpdump or wireshark on both ends > of the connection (listen on the openvpn virtual network device > tun or tap) to see what packets are going forth and back. > > > > If you use tcpdump you can add the -s 0 (for full packets) and -w > filename.cap. Then you can inspect the full packets by loading > them into wireshark. > > > > Best, > > Arjen. > > > > > > > On 2016-02-25 11:47, Marcin > Krzyżanowski wrote: > > > > Hi Jörg, > > tryed that already, aber funktioniert. > > From fd to dir: > root@:~# telnet 10.8.0.6 9101 > Trying 10.8.0.6... > Connected to 10.8.0.6. > Escape character is '^]'. > > from dir to fd: > root@bananapi ~ # telnet 10.8.0.1 9102 > Trying 10.8.0.1... > Connected to 10.8.0.1. > Escape character is '^]'. > > Deshalb habe ich keine Idee was geht nicht. > > Grusse > Marcin > > > > W dniu czwartek, 25 lutego 2016 11:06:52 UTC+1 użytkownik Jörg Steffens > napisał: > > > Hi, > > what happens, if you try to connect via telnet from the director to the > client? Just to test if the IP and port are reachable: > > telnet 10.8.0.1 9102 > > If you receive > telnet: Unable to connect to remote host: Connection refused > or > telnet: Unable to connect to remote host: Connection timed out > then it is a problem with your network, independent of Bareos. > > regards, > Jörg > > > Am 25.02.2016 um 09:33 schrieb Marcin Krzyżanowski: > > > Hi, > > I've installed Bareos (dir, fd, sd) on bananian (banana pi pro) that is > connecting to a vps in internet over openvpn to bareos-fd to make the backup. > Since the vps in public I've installed there also FW but opened ports 9101, > 9102, 9103 for communication with bareos-dir/sd/fd. > > When I enter thebconsole and check the status of client - I receive: > "Connecting to Client kfamVps at 10.8.0.1:9102" > "Failed to connect to Client kfamVps." > > on the LH the client connects and responds to dir. > > I've made som tcp snoffin on openvpn interface and the communication is > working ok - the packets are arriving it's destination. > > what can be the issue? > I've triplechecked the passwords, ip's and so on. > > Below I'm putting the conf's: > > vps-fd - not working: > > Director { > Name = bananapi-dir > Password = "Nmcwd0" > } > > Director { > Name = bananapi-mon > Password = "h9IWNaH7RtpuGveKyQvJaxhr95lpifUKH6qo2OWTukYs" > Monitor = yes > } > > > FileDaemon { # this is me > Name = kfamVps > Maximum Concurrent Jobs = 2 > > } > > Messages { > Name = Standard > director = bananapi-dir = all, !skipped, !restored > } > > director's conf: > > Director { # define myself > Name = bananapi-dir > QueryFile = "/usr/lib/bareos/scripts/query.sql" > Maximum Concurrent Jobs = 50 > Password = "nUsGr3RMWxvhQMWU2a6/d4s5HKJcTGEC7S0kx8w2jEPI" # Console > password > Messages = Daemon > Auditing = yes > } > > Client { > Name = kfamVps > Address = 10.8.0.1 > Password = "Nmcwd0" > File Retention = 10 days > Job Retention = 3 months > AutoPrune = no > } > > can I debug somegow where the communication is failing? > in bconsole there is only this info: > Passwords or names not the same or > Maximum Concurrent Jobs exceeded on the FD or > FD networking messed up (restart daemon). > > Regards > Marcin > > > > -- > Jörg Steffens [email protected] > Bareos GmbH & Co. KG Phone: +49 221 630693-91 > http://www.bareos.com Fax: +49 221 630693-10 > > Sitz der Gesellschaft: Köln | Amtsgericht Köln: HRA 29646 > Komplementär: Bareos Verwaltungs-GmbH > Geschäftsführer: > S. Dühr, M. Außendorf, Jörg Steffens, P. Storz, M. v. Wieringen > > > what should I look for in particullary? > > > can I send you the cap files so maby you can investigate them? > > > > -- > You received this message because you are subscribed to a topic in the > Google Groups "bareos-users" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/bareos-users/nnLj8hJ9tIQ/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To post to this group, send email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. For more options, visit https://groups.google.com/d/optout.
