Hi folks and a happy new year to all of you. I have a running setup of Bareos 20 on Ubuntu 20.04 (Focal Fossa) with a LTO drive as storage device attached. Once I have an "AlwaysOpen = Yes" in the SD device description the backup stops after the first job and the status of the SD is like the following:
==== Device status: Device "My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst) is not open. Device is being initialized. == ==== At this point, Bareos is stuck and I need to cancel all remaining active jobs and do a "systemctl restart bareos-sd" to continue with the backup. An "AlwaysOpen=No" works but then, the tape drive is repositioning the tape to the current position again - not nice. Previous versions of Bareos handled the "AlwaysOpen=Yes" option correct and process all the jobs w/o any new tape repositioning in between. Did I miss something? Any help is appreciated. Many thanks and best regard, Robert -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/bareos-users/f5b50630-0aa1-67b3-c555-e15d327d88fb%40yahoo.de.
