Hi,
Please try to follow the suggestions you will find in the following posts:
https://groups.google.com/g/bareos-users/c/O0HDRm1WTRc
Regards,
Birgit
On 07/01/21 17:26, 'Robert@yahoomail' via bareos-users wrote:
Hi folks and a happy new year to all of you.
I have a running setup of Bareos 20 on Ubuntu 20.04 (Focal Fossa) with a
LTO drive as
storage device attached. Once I have an "AlwaysOpen = Yes" in the SD
device description
the backup stops after the first job and the status of the SD is like
the following:
====
Device status:
Device "My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst)
is not open.
Device is being initialized.
==
====
At this point, Bareos is stuck and I need to cancel all remaining active
jobs and do a "systemctl restart bareos-sd"
to continue with the backup. An "AlwaysOpen=No" works but then, the tape
drive is repositioning the
tape to the current position again - not nice. Previous versions of
Bareos handled the "AlwaysOpen=Yes" option correct
and process all the jobs w/o any new tape repositioning in between.
Did I miss something? Any help is appreciated.
Many thanks and best regard,
Robert
--
You received this message because you are subscribed to the Google Groups
"bareos-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/bareos-users/824e5800-78d3-0c44-7d2f-5e9001bf7ea6%40unifr.ch.
