Hi everyone, to put some more light on this issue, I started the Storage-Daemon in command line mode with a -d100 applied. I get the following after the first job finished:
... bareos-sd (100): stored/append.cc:80-27 Start append data. res=1 bareos-sd (100): stored/acquire.cc:460-27 acquire_append device is tape bareos-sd (100): stored/mount.cc:654-27 Swap unloading slot=65535 "My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst) bareos-sd (100): stored/mount.cc:660-27 === set in_use vol=LTO_02 bareos-sd (100): stored/mount.cc:670-27 Set swap_dev=NULL for dev="My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst) swap_dev="My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst) bareos-sd (100): stored/mount.cc:626-27 Must load "My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst) bareos-sd (100): stored/autochanger.cc:137-27 Device "My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst) is not attached to an autochanger bareos-sd (50): stored/askdir.cc:181-27 >dird CatReq Job=donald-backup.2021-01-08_14.26.37_05 GetVolInfo VolName=LTO_02 write=1 bareos-sd (50): stored/askdir.cc:108-27 <dird 1000 OK VolName=LTO_02 VolJobs=13 VolFiles=96 VolBlocks=1326427 VolBytes=85570523136 VolMounts=12 VolErrors=0 VolWrites=1326428 MaxVolBytes=0 VolCapacityBytes=0 VolStatus=Append Slot=0 MaxVolJobs=0 MaxVolFiles=0 InChanger=0 VolReadTime=0 VolWriteTime=5007510880 EndFile=95 EndBlock=657 LabelType=0 MediaId=2 EncryptionKey= MinBlocksize=0 MaxBlocksize=0 bareos-sd (50): stored/askdir.cc:140-27 DoGetVolumeInfo return true slot=0 Volume=LTO_02, VolminBlocksize=0 VolMaxBlocksize=0 bareos-sd (50): stored/askdir.cc:144-27 setting dcr->VolMinBlocksize(0) to vol.VolMinBlocksize(0) bareos-sd (50): stored/askdir.cc:147-27 setting dcr->VolMaxBlocksize(0) to vol.VolMaxBlocksize(0) bareos-sd (100): stored/autochanger.cc:137-27 Device "My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst) is not attached to an autochanger bareos-sd (100): stored/dev.cc:618-27 open dev: type=2 dev_name="My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst) vol=LTO_02 mode=OPEN_READ_WRITE bareos-sd (100): stored/dev.cc:638-27 call OpenDevice mode=OPEN_READ_WRITE bareos-sd (100): backends/generic_tape_device.cc:58-27 Open dev: device is tape bareos-sd (100): backends/generic_tape_device.cc:67-27 Try open "My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst) mode=OPEN_READ_WRITE bareos-sd (100): backends/generic_tape_device.cc:87-27 Open error on "My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst) omode=2 oflags=2 errno=16: ERR=Device or resource busy bareos-sd (100): backends/generic_tape_device.cc:87-27 Open error on "My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst) omode=2 oflags=2 errno=16: ERR=Device or resource busy ... The last message is repeated many times and Bareos finally aborts after 10 minutes with an error message: 08-Jan 14:39 bareos-sd JobId 27: Warning: stored/mount.cc:275 Open device "My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst) Volume "LTO_02" failed: ERR=backends/generic_tape_device.cc:141 Unable to open device "My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst): ERR=Device or resource busy Hope someone can use this to identify the root cause. Best regards, Robert Am 07.01.21 um 17:26 schrieb 'Robert@yahoomail' via bareos-users:
Hi folks and a happy new year to all of you. I have a running setup of Bareos 20 on Ubuntu 20.04 (Focal Fossa) with a LTO drive as storage device attached. Once I have an "AlwaysOpen = Yes" in the SD device description the backup stops after the first job and the status of the SD is like the following: ==== Device status: Device "My-LTO" (/dev/tape/by-id/scsi-1IBM_ULTRIUM-TD1_1391028290-nst) is not open. Device is being initialized. == ==== At this point, Bareos is stuck and I need to cancel all remaining active jobs and do a "systemctl restart bareos-sd" to continue with the backup. An "AlwaysOpen=No" works but then, the tape drive is repositioning the tape to the current position again - not nice. Previous versions of Bareos handled the "AlwaysOpen=Yes" option correct and process all the jobs w/o any new tape repositioning in between. Did I miss something? Any help is appreciated. Many thanks and best regard, Robert
-- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/bareos-users/d20533e1-2d4c-a8f0-2ab5-b5fe234f469f%40yahoo.de.
