Sweet :) The read VSM works great on my 6200, but returns bad command with my 8800 :( I suspect that the correct MFI needs to be loaded to get the command on later models, the same as loading a VSM.
We need bootload mode to load an MFI and I haven't been able to get to that yet, let alone how to load the various sections of the MFI .... On Sat, 2009-05-09 at 00:56 -0500, Robert Yaklin wrote: > I just found this posted on a forum and thought it would be of interest here: > Snip > read VSM:01 00 0c 00 3a ff 04 00 00 00 02 ff (segment1) > <- : 01 00 0c 00 3a ff 04 00 00 01 02 ff (segment2) > <- : 01 00 0c 00 3a ff 04 00 00 02 02 ff (segment3) > > These commands need to be sent over the RIM Cal task channel - > > <-: 00 00 18 00 07 ff 00 00 52 49 4d 20 43 61 6c 20 74 61 73 6b 00 00 > 00 00 ; request an open with RIM Cal task > ->: read response > <-: 00 00 08 00 0a 01 00 0b ; complete handshake > ->: read repsonse > <-: 01 00 0c 00 3a ff 04 00 00 00 02 ff ; request VSM file > ->: read out VSM file > > ------------------------------------------------------------------------------ > The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your > production scanning environment may not be a perfect world - but thanks to > Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 > Series Scanner you'll get full speed at 300 dpi even with all image > processing features enabled. http://p.sf.net/sfu/kodak-com > _______________________________________________ > Barry-devel mailing list > Barry-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/barry-devel ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Barry-devel mailing list Barry-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/barry-devel
