On Sat, 2009-05-09 at 07:55 -0500, Robert Yaklin wrote: > http://forum.gsmhosting.com/vbb/showthread.php?t=747009 > > I haven't tried the commands myself yet, but would agree that the > correct MFI is needed except for some 7xxx and earlier models. I also > believe that all the commands are sent over the RIM Cal task > channel...except of course the request to open the RIM Cal task > channel.
Correct, read and write to /dev/bbcaltask0 :) > > It would be interesting to see if the read VSM fails on the 8900, > 9530, and the 8220 even with their MFI file loaded. People apparently > get an RTAS authentication error when trying to load a VSM on those > models. I don't have any of those, but I will be trying the 7100 and 8700. I just noticed that I have my 6200 set with a vendor id of 1. Hopefully that is the difference. I know the 8700 has some extra special things when the vendor id is 1 ... > > I don't have a list, but I guess this could be the start of one. > > On Sat, May 9, 2009 at 5:54 AM, Rick Scott <rwsc...@alumni.uwaterloo.ca> > wrote: > > Sweet :) The read VSM works great on my 6200, but returns bad command > > with my 8800 :( I suspect that the correct MFI needs to be loaded to get > > the command on later models, the same as loading a VSM. > > > > We need bootload mode to load an MFI and I haven't been able to get to > > that yet, let alone how to load the various sections of the MFI .... > > > > On Sat, 2009-05-09 at 00:56 -0500, Robert Yaklin wrote: > >> I just found this posted on a forum and thought it would be of interest > >> here: > >> > > > > Snip > > > >> read VSM:01 00 0c 00 3a ff 04 00 00 00 02 ff (segment1) > >> <- : 01 00 0c 00 3a ff 04 00 00 01 02 ff (segment2) > >> <- : 01 00 0c 00 3a ff 04 00 00 02 02 ff (segment3) > >> > >> These commands need to be sent over the RIM Cal task channel - > >> > >> <-: 00 00 18 00 07 ff 00 00 52 49 4d 20 43 61 6c 20 74 61 73 6b 00 00 > >> 00 00 ; request an open with RIM Cal task > >> ->: read response > >> <-: 00 00 08 00 0a 01 00 0b ; complete handshake > >> ->: read repsonse > >> <-: 01 00 0c 00 3a ff 04 00 00 00 02 ff ; request VSM file > >> ->: read out VSM file > >> > >> ------------------------------------------------------------------------------ > >> The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your > >> production scanning environment may not be a perfect world - but thanks to > >> Kodak, there's a perfect scanner to get the job done! With the NEW KODAK > >> i700 > >> Series Scanner you'll get full speed at 300 dpi even with all image > >> processing features enabled. http://p.sf.net/sfu/kodak-com > >> _______________________________________________ > >> Barry-devel mailing list > >> Barry-devel@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/barry-devel > > > > ------------------------------------------------------------------------------ > > The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your > > production scanning environment may not be a perfect world - but thanks to > > Kodak, there's a perfect scanner to get the job done! With the NEW KODAK > > i700 > > Series Scanner you'll get full speed at 300 dpi even with all image > > processing features enabled. http://p.sf.net/sfu/kodak-com > > _______________________________________________ > > Barry-devel mailing list > > Barry-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/barry-devel > > ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Barry-devel mailing list Barry-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/barry-devel
