On Sat, Apr 04, 2009 at 05:23:53AM -0400, Rick Scott wrote: > On Fri, 2009-04-03 at 22:31 -0400, Chris Frey wrote: > > I did notice that I was able to access the databases using btool > > if I disabled bcharge (it would stay at 100mA). So bcharge may be putting > > it in a funky state. I disabled bcharge by commenting out the commands > > in /etc/udev/rules.d/10-blackberry.rules, so I had to run btool as root. > > I only change the charge if (dev->descriptor.bcdDevice >= 0x0100). You > can do this check in the udev rules, or btool itself. I needed this for > the 6200, and 7100's, I think. 6200 for sure, I don't have a 7100 around > right now.
Unfortunately, for the 7130 I have here, it reports a bcdDevice of 1.04, which is the same as the 7750 that works properly. - Chris ------------------------------------------------------------------------------ Are you an open source citizen? Join us for the Open Source Bridge conference! Portland, OR, June 17-19. Two days of sessions, one day of unconference: $250. Need another reason to go? 24-hour hacker lounge. Register today! http://ad.doubleclick.net/clk;215844324;13503038;v?http://opensourcebridge.org _______________________________________________ Barry-devel mailing list Barry-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/barry-devel
