btw, in Ad-Hoc mode it seems to work, but i get some errors:
b43-phy4: Broadcom 4318 WLAN found b43-phy4 debug: Found PHY: Analog 3, Type 2, Revision 7 b43-phy4 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8 b43-phy4 debug: DebugFS (CONFIG_DEBUG_FS) not enabled in kernel config phy4: Selected rate control algorithm 'pid' Broadcom 43xx driver loaded [ Features: N, Firmware-ID: FW13 ] wlan0: Trigger new scan to find an IBSS to join b43-phy4: Loading firmware version 410.2160 (2007-05-26 15:32:10) b43-phy4 debug: Chip initialized b43-phy4 debug: 32-bit DMA initialized b43-phy4 debug: Wireless interface started b43-phy4 debug: Adding Interface type 3 phy4: Adding new IBSS station 00:1b:fc:f2:49:b2 (dev=wlan0) WARNING: at /usr/src2/openwrt/trunk/build_dir/linux-brcm47xx/mac80211/net/mac80211/ieee80211_rate.h:153 rate_lowest_index() Call Trace:[<8000a344>][<8000a344>][<c00f5da0>][<c00e15e0>][<802077c0>][<c00ed114>][<c0159b9c>][<8001e278>][<80105120>][<c00ef1dc>][<8016d6c8>][<8016d87c>][<80179d4c>][<80105120>][<80177f78>][<c00f0000>][<c00da9b8>][<8002b568>][<8004b1e0>][<8002afb0>][<8004d170>][<8002b094>][<80001d44>][<80003e44>][<800038f4>][<8017cff0>][<80006000>][<80006000>][<800fdfd4>][<80263d4c>][<80263198>] wlan0: Trigger new scan to find an IBSS to join wlan0: Creating new IBSS network, BSSID 22:08:a1:65:b7:fc RTNL: assertion failed at /usr/src2/openwrt/trunk/build_dir/linux-brcm47xx/mac80211/net/mac80211/sta_info.c (140) Call Trace:[<8000a344>][<8000a344>][<c00dd7a4>][<c00dd724>][<c00dda4c>][<8001f634>][<c00e1f5c>][<80074b58>][<c00e281c>][<c00e4148>][<8016d6c8>][<8001dd90>][<c00e3770>][<80181e08>][<c00e46a0>][<8001c9d4>][<80037b4c>][<80037b4c>][<800388f4>][<8021173c>][<8003d1b0>][<80038838>][<8003ce9c>][<8003ce80>][<80005d50>][<80005d40>] RTNL: assertion failed at /usr/src2/openwrt/trunk/build_dir/linux-brcm47xx/mac80211/net/mac80211/key.c (275) Call Trace:[<8000a344>][<8000a344>][<c00f38f8>][<c00dd7b4>][<c00dd724>][<c00dda4c>][<8001f634>][<c00e1f5c>][<80074b58>][<c00e281c>][<c00e4148>][<8016d6c8>][<8001dd90>][<c00e3770>][<80181e08>][<c00e46a0>][<8001c9d4>][<80037b4c>][<80037b4c>][<800388f4>][<8021173c>][<8003d1b0>][<80038838>][<8003ce9c>][<8003ce80>][<80005d50>][<80005d40>] wlan0: Configured IBSS beacon template wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) phy4: Adding new IBSS station 00:1b:fc:f2:49:b2 (dev=wlan0) wlan0: expiring inactive STA 00:1b:fc:f2:49:b2 wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) phy4: Adding new IBSS station 00:1b:fc:f2:49:b2 (dev=wlan0) device wlan0 entered promiscuous mode br-lan: port 2(wlan0) entering learning state br-lan: topology change detected, propagating br-lan: port 2(wlan0) entering forwarding state b43-phy4 ERROR: PHY transmission error b43-phy4 ERROR: PHY transmission error b43-phy4 ERROR: PHY transmission error b43-phy4 ERROR: PHY transmission error b43-phy4 ERROR: PHY transmission error b43-phy4 ERROR: PHY transmission error b43-phy4 ERROR: PHY transmission error ...... wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) wlan0: expiring inactive STA 00:1b:fc:f2:49:b2 wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge) b43-phy4 debug: Removing Interface type 3 b43-phy4 debug: Wireless interface stopped b43-phy4 debug: DMA-32 rx_ring: Used slots 5/64, Failed frames 0/0 = 0.0%, Average tries 0.00 b43-phy4 debug: DMA-32 tx_ring_AC_BK: Used slots 0/128, Failed frames 0/0 = 0.0%, Average tries 0.00 b43-phy4 debug: DMA-32 tx_ring_AC_BE: Used slots 48/128, Failed frames 13/1280 = 1.0%, Average tries 1.36 b43-phy4 debug: DMA-32 tx_ring_AC_VI: Used slots 0/128, Failed frames 0/0 = 0.0%, Average tries 0.00 b43-phy4 debug: DMA-32 tx_ring_AC_VO: Used slots 20/128, Failed frames 3/198 = 1.5%, Average tries 1.12 b43-phy4 debug: DMA-32 tx_ring_mcast: Used slots 0/128, Failed frames 0/0 = 0.0%, Average tries 0.00 br-lan: port 2(wlan0) entering disabled state
_______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
