They are working together at last (with current wireless-testing and patches from 20080405-1450) But there is still one more problem: I can't make it work with WPA - there are errors (similar to http://marc.info/?l=linux-wireless&m=120627382928458&w=2 ) Also I've noticed that problem happens only when wlan0 was added to bridge (brctl addif br-lan wlan0). Without bridge it seems to work.
And this happens only with WPA (open mode and WEP works well with bridge). Best regards. 2008/3/10, Artem Antonov <[EMAIL PROTECTED]>: > > Hi! > I can't make them work together. I'm using b43 driver from wireless-testing > (+ allow-ap-vlan-modes patch) and hostapd from git. > > Here is hostapd log: > > STA 00:1b:fc:f2:49:b2 sent probe request for broadcast SSID > MGMT (TX callback) ACK > mgmt::proberesp cb > STA 00:1b:fc:f2:49:b2 sent probe request for broadcast SSID > MGMT (TX callback) ACK > mgmt::proberesp cb > STA 00:1b:fc:f2:49:b2 sent probe request for broadcast SSID > MGMT (TX callback) ACK > mgmt::proberesp cb > STA 00:1b:fc:f2:49:b2 sent probe request for broadcast SSID > MGMT (TX callback) ACK > mgmt::proberesp cb > MGMT > mgmt::deauth > deauthentication: STA=00:1b:fc:f2:49:b2 reason_code=3 > Station 00:1b:fc:f2:49:b2 trying to deauthenticate, but it is not > authenticated. > > dmesg log: > > b43-phy3: Broadcom 4318 WLAN found > b43-phy3 debug: Found PHY: Analog 3, Type 2, Revision 7 > b43-phy3 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8 > b43-phy3 debug: DebugFS (CONFIG_DEBUG_FS) not enabled in kernel config > phy3: Selected rate control algorithm 'pid' > Broadcom 43xx driver loaded [ Features: L, Firmware-ID: FW13 ] > b43-phy3: Loading firmware version 410.2160 (2007-05-26 15:32:10) > b43-phy3 debug: Chip initialized > b43-phy3 debug: 32-bit DMA initialized > b43-phy3 debug: Wireless interface started > b43-phy3 debug: Adding Interface type 1 > b43-phy3 debug: Removing Interface type 1 > b43-phy3 debug: Wireless interface stopped > b43-phy3 debug: DMA-32 rx_ring: Used slots 1/64, Failed frames 0/0 = 0.0%, > Average tries 0.00 > b43-phy3 debug: DMA-32 tx_ring_AC_BK: Used slots 0/128, Failed frames 0/0 > = 0.0%, Average tries 0.00 > b43-phy3 debug: DMA-32 tx_ring_AC_BE: Used slots 2/128, Failed frames 0/5 > = 0.0%, Average tries 1.80 > b43-phy3 debug: DMA-32 tx_ring_AC_VI: Used slots 0/128, Failed frames 0/0 > = 0.0%, Average tries 0.00 > b43-phy3 debug: DMA-32 tx_ring_AC_VO: Used slots 0/128, Failed frames 0/0 > = 0.0%, Average tries 0.00 > b43-phy3 debug: DMA-32 tx_ring_mcast: Used slots 0/128, Failed frames 0/0 > = 0.0%, Average tries 0.00 > > Best regards. >
_______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
