Tex wrote: > I'm sorry, the linux version is the base UBUNTU 2.6.24-19-generic not > 2.6.25.9 (I haven't tested that 1 yet). > > > Tex wrote: >> When I use the baseline modules from linux-2.6.25.9, I cannot >> associate with my access points, and I can't even go into monitor >> mode, the MAC address is also random. if I use the compat_wireless >> (snapshot of 06-21) I can associate with my access points and I can >> even go into monitor mode. I'm currently using x86 with Broadcom 4318 >> CF (PCMCIA): >> >> Thanks in advance for your help >> Tex >> >> (FYI: 00deadbeef = fake key) >> Commands entered and command results: >> [EMAIL PROTECTED]:/var/log# iwconfig wlan0 essid trackcoach2 key 00deadbeef >> chann 4 >> [EMAIL PROTECTED]:/var/log# iwconfig >> lo no wireless extensions. >> >> eth0 no wireless extensions. >> >> wmaster0 no wireless extensions. >> >> wlan0 IEEE 802.11 ESSID:"trackcoach2" Mode:Managed >> Frequency:2.427 GHz Access Point: 00:15:05:EC:2E:54 Bit >> Rate=1 Mb/s Tx-Power=27 dBm Retry min limit:7 RTS >> thr:off Fragment thr=2352 B Encryption key:0FB3-CFC8-78 >> Link Quality=68/100 Signal level:-43 dBm Noise level=-72 dBm >> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 >> Tx excessive retries:0 Invalid misc:0 Missed beacon:0 >> >> >> snapshot for kern.log running compat_wireless source dated 06-21: >> >> Aug 16 11:17:28 ubuntu kernel: [ 980.756067] ssb: Core 0 found: >> ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) >> Aug 16 11:17:28 ubuntu kernel: [ 980.756182] ssb: Core 1 found: IEEE >> 802.11 (cc 0x812, rev 0x09, vendor 0x4243) >> Aug 16 11:17:28 ubuntu kernel: [ 980.756287] ssb: Core 2 found: PCI >> (cc 0x804, rev 0x0C, vendor 0x4243) >> Aug 16 11:17:28 ubuntu kernel: [ 980.756391] ssb: Core 3 found: >> PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) >> Aug 16 11:17:28 ubuntu kernel: [ 980.841103] ssb: Sonics Silicon >> Backplane found on PCMCIA device pcmcia0.0 >> Aug 16 11:17:28 ubuntu kernel: [ 980.843423] b43-phy2: Broadcom 4318 >> WLAN found >> Aug 16 11:17:28 ubuntu kernel: [ 980.864824] b43-phy2 debug: Found >> PHY: Analog 3, Type 2, Revision 7 >> Aug 16 11:17:28 ubuntu kernel: [ 980.864861] b43-phy2 debug: Found >> Radio: Manuf 0x17F, Version 0x2050, Revision 8 >> Aug 16 11:17:28 ubuntu kernel: [ 980.890769] phy2: Selected rate >> control algorithm 'pid' >> Aug 16 11:17:28 ubuntu kernel: [ 980.894425] Broadcom 43xx driver >> loaded [ Features: PMLR, Firmware-ID: FW13 ] >> Aug 16 11:17:28 ubuntu kernel: [ 981.037152] input: b43-phy2 as >> /class/input/input13 >> >> Aug 16 11:17:29 ubuntu kernel: [ 981.286962] b43-phy2: Loading >> firmware version 410.2160 (2007-05-26 15:32:10) >> Aug 16 11:17:29 ubuntu kernel: [ 981.386914] b43-phy2 debug: Chip >> initialized >> Aug 16 11:17:29 ubuntu kernel: [ 981.387163] b43-phy2 debug: PIO >> initialized >> Aug 16 11:17:29 ubuntu kernel: [ 981.394286] Registered led device: >> b43-phy2::tx >> Aug 16 11:17:29 ubuntu kernel: [ 981.395342] Registered led device: >> b43-phy2::rx >> Aug 16 11:17:29 ubuntu kernel: [ 981.396162] Registered led device: >> b43-phy2::radio >> Aug 16 11:17:29 ubuntu kernel: [ 981.396236] b43-phy2 debug: Wireless >> interface started >> Aug 16 11:17:29 ubuntu kernel: [ 981.422452] b43-phy2 debug: Adding >> Interface type 2 >> Aug 16 11:17:29 ubuntu kernel: [ 981.434619] ADDRCONF(NETDEV_UP): >> wlan0: link is not ready >> Aug 16 11:17:40 ubuntu kernel: [ 992.409510] b43-phy2 debug: Using >> hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff >> Aug 16 11:17:41 ubuntu kernel: [ 993.176152] wlan0: Initial auth_alg=0 >> Aug 16 11:17:41 ubuntu kernel: [ 993.176171] wlan0: authenticate with >> AP 00:15:05:ec:2e:54 >> Aug 16 11:17:41 ubuntu kernel: [ 993.185280] wlan0: RX authentication >> from 00:15:05:ec:2e:54 (alg=0 transaction=2 status=0) >> Aug 16 11:17:41 ubuntu kernel: [ 993.185290] wlan0: authenticated >> Aug 16 11:17:41 ubuntu kernel: [ 993.185297] wlan0: associate with AP >> 00:15:05:ec:2e:54 >> Aug 16 11:17:41 ubuntu kernel: [ 993.187344] wlan0: RX AssocResp from >> 00:15:05:ec:2e:54 (capab=0x431 status=0 aid=2) >> Aug 16 11:17:41 ubuntu kernel: [ 993.187351] wlan0: associated >> Aug 16 11:17:41 ubuntu kernel: [ 993.188636] ADDRCONF(NETDEV_CHANGE): >> wlan0: link becomes ready >> >> >> >> Commands entered: >> iwconfig wlan0 essid trackcoach2 key 00deadbeef chann 4 >> [EMAIL PROTECTED]:~# iwconfig >> lo no wireless extensions. >> >> eth0 no wireless extensions. >> >> wmaster0 no wireless extensions. >> >> wlan0 IEEE 802.11g ESSID:"trackcoach2" Mode:Managed >> Frequency:2.427 GHz Access Point: Not-Associated >> Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment >> thr=2352 B Encryption key:0FB3-CFC8-78 >> Link Quality:0 Signal level:0 Noise level:0 >> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 >> Tx excessive retries:0 Invalid misc:0 Missed beacon:0 >> >> >> >> Kernel log file using linux base linux-2.6.25.9: >> Aug 16 11:46:49 ubuntu kernel: [ 674.570729] pcmcia: registering new >> device pcmcia0.0 >> Aug 16 11:46:50 ubuntu kernel: [ 675.248587] ssb: Core 0 found: >> ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) >> Aug 16 11:46:50 ubuntu kernel: [ 675.248733] ssb: Core 1 found: IEEE >> 802.11 (cc 0x812, rev 0x09, vendor 0x4243) >> Aug 16 11:46:50 ubuntu kernel: [ 675.248839] ssb: Core 2 found: PCI >> (cc 0x804, rev 0x0C, vendor 0x4243) >> Aug 16 11:46:50 ubuntu kernel: [ 675.248943] ssb: Core 3 found: >> PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) >> Aug 16 11:46:50 ubuntu kernel: [ 675.258113] ssb: Sonics Silicon >> Backplane found on PCMCIA device pcmcia0.0 >> Aug 16 11:46:50 ubuntu kernel: [ 675.260339] b43-phy0: Broadcom 4318 >> WLAN found >> Aug 16 11:46:50 ubuntu kernel: [ 675.280772] b43-phy0 debug: Found >> PHY: Analog 3, Type 2, Revision 7 >> Aug 16 11:46:50 ubuntu kernel: [ 675.280810] b43-phy0 debug: Found >> Radio: Manuf 0x17F, Version 0x2050, Revision 8 >> Aug 16 11:46:50 ubuntu kernel: [ 675.306686] phy0: Selected rate >> control algorithm 'pid' >> Aug 16 11:46:50 ubuntu kernel: [ 675.527595] Broadcom 43xx driver >> loaded [ Features: PMLR, Firmware-ID: FW13 ] >> Aug 16 11:46:50 ubuntu kernel: [ 675.712722] input: b43-phy0 as >> /class/input/input9 >> Aug 16 11:46:50 ubuntu kernel: [ 675.978279] b43-phy0: Loading >> firmware version 410.2160 (2007-05-26 15:32:10) >> Aug 16 11:46:52 ubuntu kernel: [ 677.227536] b43-phy0 debug: Chip >> initialized >> Aug 16 11:46:52 ubuntu kernel: [ 677.229015] b43-phy0 debug: 32-bit >> DMA initialized >> Aug 16 11:46:52 ubuntu kernel: [ 677.235404] b43-phy0 debug: Wireless >> interface started >> Aug 16 11:46:52 ubuntu kernel: [ 677.258321] b43-phy0 debug: Adding >> Interface type 2 >> Aug 16 11:46:52 ubuntu kernel: [ 677.270523] ADDRCONF(NETDEV_UP): >> wlan0: link is not ready >> Aug 16 11:47:06 ubuntu kernel: [ 691.850496] b43-phy0 debug: Using >> hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
Please provide two extra pieces of information: (1) From the command 'lspci -nnv', post the first two lines that describe your BCM4318. (2) Post the ooutput from 'ifconfig' Larry _______________________________________________ Bcm43xx-dev mailing list [email protected] https://lists.berlios.de/mailman/listinfo/bcm43xx-dev
