Hi Tom, I'm terribly sorry annoying you for once more time with this issue. I have tried to figure out what patch sets you are suggesting below. 2013/11/2 <[email protected]>
> I think that at least part of the answer is that you need to enable > CONFIG_SYS_NAND_ONFI_DETECTION. You may also need to apply some of > Pekon's patches from http://patchwork.ozlabs.org/ > project/uboot/list/?submitter=17320&state=* (there are 3 series there as > of this writing, 2 v2's and a v8, you should apply all 3 series, and in the > right order, saving each series to an mbox, and using git am -3 / git am > --abort when they fail should help get the right order sorted out quickly). > So, to make it clear as crystal even for me, let's list what I found matching with your message: 2013-08-14 [U-Boot,v2,1/4] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform [U-Boot,v2,2/4] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes [U-Boot,v2,3/4] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes [U-Boot,v2,4/4] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes 2013-09-06 [U-Boot,v2,1/3] am33xx: elm: add support for BCH16_ECC - ELM driver updates [U-Boot,v2,2/3] mtd: nand: omap: add support for BCH16_ECC - NAND driver updates [U-Boot,v2,3/3] am335x: update README for BCH16 2013-09-30 [U-Boot,v2,1/4] mtd: nand: add NAND_BUSWIDTH_AUTO to autodetect bus width [U-Boot,v2,2/4] am33xx: add CONFIG_SYS_NAND_DEVICE_WIDTH to determine NAND device bus-width [U-Boot,v2,3/4] am335x: fix GPMC config for NAND and NOR SPL boot [U-Boot,v2,4/4] am33xx: add support for beaglebone x16 NAND cape 2013-10-10 [U-Boot,v8,1/5] mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform [U-Boot,v8,2/5] mtd: nand: omap: optimize chip->ecc.hwctl() for H/W ECC schemes [U-Boot,v8,3/5] mtd: nand: omap: optimize chip->ecc.calculate() for H/W ECC schemes [U-Boot,v8,4/5] mtd: nand: omap: optimized chip->ecc.correct() for H/W ECC schemes [U-Boot,v8,5/5] board/ti/am335x/README: update for NAND boot It seems to me that 2013-08-14 and 2013-10-10 are providing (more or less) same patch set => My choice is 2013-10-10 2013-09-06 and 2013-09-30 seem different to me => these are the 2v2's your mentioned above My guess for patching order would be: 1) 2013-10-10 2) 2013-09-06 3) 2013-09-30 -Matti -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
