Are you pulling the power after the flashing process and reinserting it? http://www.elinux.org/Beagleboard:Updating_The_Software
Gerald On Thu, Dec 26, 2013 at 9:21 PM, Conrad King <[email protected]>wrote: > Hi all, I have tried to flash my BBB with the new Angstrom. I download > "Angstrom > Distribution (BeagleBone Black - 2GB eMMC) > 2013-09-04<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.09.04.img.xz>" > and put it onto my 4GB SD card using "win32diskimager-v0.9-binary" > All went well. I then put it in and held down the button near the SD card > and waited 45mins. I came back and all the lights were no longer flashing. > > I restart the BBB and this screen comes up (Note: it is the same screen > that came up before I flashed it) > > > <https://lh3.googleusercontent.com/-uUEZBoMO43Q/UrzuT-YnB7I/AAAAAAAAArY/04Tgz9RHY68/s1600/IMG_0271.jpg> > > This is not the version I flashed. I flashed the current version. If I try > to flash it (Like I currently am again) this screen comes up. > > > Any help would be great. I have been on this for hours now. > > Thanks, > Conrad > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
