No, that is what you are supposed to do. If you follow the instructions found at the link I sent you, it will work. You can try the latest version or use and older version followed by the latest to get the process down.
Gerald On Thu, Dec 26, 2013 at 9:31 PM, Conrad King <[email protected]>wrote: > Yes. Once it has stopped flashing I do unplug it.... Is that the problem? > > > On Friday, December 27, 2013 3:25:01 AM UTC, Gerald wrote: > >> Are you pulling the power after the flashing process and reinserting it? >> >> http://www.elinux.org/Beagleboard:Updating_The_Software >> >> Gerald >> >> >> On Thu, Dec 26, 2013 at 9:21 PM, Conrad King <[email protected]> wrote: >> >>> Hi all, I have tried to flash my BBB with the new Angstrom. I download >>> "Angstrom >>> Distribution (BeagleBone Black - 2GB eMMC) >>> 2013-09-04<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.09.04.img.xz>" >>> and put it onto my 4GB SD card using "win32diskimager-v0.9-binary" >>> All went well. I then put it in and held down the button near the SD >>> card and waited 45mins. I came back and all the lights were no longer >>> flashing. >>> >>> I restart the BBB and this screen comes up (Note: it is the same screen >>> that came up before I flashed it) >>> >>> >>> <https://lh3.googleusercontent.com/-uUEZBoMO43Q/UrzuT-YnB7I/AAAAAAAAArY/04Tgz9RHY68/s1600/IMG_0271.jpg> >>> >>> This is not the version I flashed. I flashed the current version. If I >>> try to flash it (Like I currently am again) this screen comes up. >>> >>> >>> Any help would be great. I have been on this for hours now. >>> >>> Thanks, >>> Conrad >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
