For some reason it is all working now. I tried 5 times and as soon as I ask ft starts working :)
The only thing I think I did differently is that I removed the straight away. So once the LEDs stopped flashing I powered off (Removed the USB cable) then took out the SD card. Then I placed the USB cable and powered up. I think before I might have done this after powering up again... I'm not sure though. I think the link you gave me is much better than the one used on the main page. Anyway, I think its working now. Thanks Gerald. Conrad On Friday, December 27, 2013 3:34:27 AM UTC, Gerald wrote: > > No, that is what you are supposed to do. If you follow the instructions > found at the link I sent you, it will work. You can try the latest version > or use and older version followed by the latest to get the process down. > > Gerald > > > > On Thu, Dec 26, 2013 at 9:31 PM, Conrad King <[email protected]<javascript:> > > wrote: > >> Yes. Once it has stopped flashing I do unplug it.... Is that the problem? >> >> >> On Friday, December 27, 2013 3:25:01 AM UTC, Gerald wrote: >> >>> Are you pulling the power after the flashing process and reinserting it? >>> >>> http://www.elinux.org/Beagleboard:Updating_The_Software >>> >>> Gerald >>> >>> >>> On Thu, Dec 26, 2013 at 9:21 PM, Conrad King <[email protected]>wrote: >>> >>>> Hi all, I have tried to flash my BBB with the new Angstrom. I >>>> download "Angstrom Distribution (BeagleBone Black - 2GB eMMC) >>>> 2013-09-04<https://s3.amazonaws.com/angstrom/demo/beaglebone/BBB-eMMC-flasher-2013.09.04.img.xz>" >>>> >>>> and put it onto my 4GB SD card using "win32diskimager-v0.9-binary" >>>> All went well. I then put it in and held down the button near the SD >>>> card and waited 45mins. I came back and all the lights were no longer >>>> flashing. >>>> >>>> I restart the BBB and this screen comes up (Note: it is the same screen >>>> that came up before I flashed it) >>>> >>>> >>>> <https://lh3.googleusercontent.com/-uUEZBoMO43Q/UrzuT-YnB7I/AAAAAAAAArY/04Tgz9RHY68/s1600/IMG_0271.jpg> >>>> >>>> This is not the version I flashed. I flashed the current version. If I >>>> try to flash it (Like I currently am again) this screen comes up. >>>> >>>> >>>> Any help would be great. I have been on this for hours now. >>>> >>>> Thanks, >>>> Conrad >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>> >>> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
