On Fri, Jan 3, 2014 at 1:12 PM, KurtE <[email protected]> wrote: > Thanks, > > I know asking for which OS to use is a loaded question, that usually has the > simple answer, of which ever one works for you... > > So after reading through the Angstrom/Rants thread, plus some others, > decided to also try out Debian Wheezy, which I installed off of: > http://elinux.org/BeagleBoardDebian. I installed the EMMC version, which is > great. > > Now starting to fumble my way through to get the system configured up. I > now have the wifi working, which is great. Yep driver just worked. Only > thing I needed to do was to figure out how to configure it for my WPA... Now > working. Took me a few minutes to figure out what IP address it has, as did > not see anything in the dmesg output. Also dont have ifconfig...
use the full path for non root/sudo users.. /sbin/ifconfig >But found > it looking at my DHCP servers log output. > > Next up: find where I put my 3.3v FTDI cable and look at seeing what I need > to do again (if anything), to enable the usarts through the device maps. > Was using a couple before for XBee and the like. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
