OKAY I finally got rid of gnome and the script worked to copy from sdcard 
to eMMC.  

So i decided to start at screenconnect version 3.4 and upgrade all the way 
up to 4.1beta.

3.4 works!!! awesome because it did not work on the regular debian or 
ubuntu for beaglebone prebuilt images!!
4.0 installed fine, but I got spinning circles ( had same issue in angstrom 
hence was fixed with 4.1 beta) and never stops spinning.
4.1 beta  installs fine, but no webpage at all,  upon looking at top shows 
mono spiking the cpu off and on.

Right before i was going to roll back to 3.4 (about 20 minutes after 
starting sc service) I was going to for fun just refresh the webpage and 
BAM!!  WORKS.  Not sure yet how well but will test it asap.  

This has been an incredible day and a good learning experience.  I think I 
am about to get my dream come true which is to run screenconnect on debian 
on my beagle bone black! :)



On Thursday, January 9, 2014 5:23:22 PM UTC-6, Jacob Bell wrote:
>
> i thought it would be cool to add gnome desktop to the netinstall.  then i 
> ran your script and failed saying not enough room on target.  i guess i 
> need to either start all over(took allday)  or somehow figure out how to 
> remove gnome desktop to have enough room to hopefully install to eMMC. I am 
> following this: 
> http://superuser.com/questions/603392/how-to-remove-gnome-3-and-all-its-dependencies-from-a-debian-wheezy-netinst
>
> hope script works, then if so, finally will get to test screenconnect to 
> see if it will run. 
>
>
>
> On Thursday, January 9, 2014 12:20:04 PM UTC-6, Jacob Bell wrote:
>>
>> ok thank you for all your extended help. 
>>
>> On Thursday, January 9, 2014 12:06:29 PM UTC-6, RobertCNelson wrote:
>>>
>>> On Thu, Jan 9, 2014 at 12:01 PM, Jacob Bell <[email protected]> 
>>> wrote: 
>>> > ok so since im ssh into my beaglebone now to the microSD running 
>>> debian, and 
>>> > angstrom is on eMMC, I have to flash my microSD with a flasher debian 
>>> > version because angstrom probably wont run your net install, once 
>>> flashed, i 
>>> > boot to eMMC  and i then can do the net install to the MicroSD, then 
>>> boot to 
>>> > the microsd, then use your script and reboot after done with microsd 
>>> card 
>>> > out and i should be good to go.?!?! 
>>>
>>> Sorry i got lost in ^^.. 
>>>
>>> My "NetInstall" doesn't really support Angstrom, as Angstrom is 
>>> missing a few of the commands needed... 
>>>
>>> So don't use Angstrom to run the NetInstall.. 
>>>
>>> Grab either another linux box.. Running debian/ubuntu (not virtual).. 
>>> or a 2nd beaglebone running debian/ubuntu.. 
>>>
>>> use the microSD boot into the installer... install.. .reboot... 
>>>
>>> run the script to transfer microSD to eMMC.. 
>>>
>>> Regards, 
>>>
>>> -- 
>>> Robert Nelson 
>>> http://www.rcn-ee.com/ 
>>>
>>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/groups/opt_out.

Reply via email to