Awesome!! I have now tested screenconnect and its working better than it was on angstrom like i figured it would. Thank you Robert and David for the help.
On Thursday, January 9, 2014 7:42:45 PM UTC-6, Jacob Bell wrote: > > OKAY I finally got rid of gnome and the script worked to copy from sdcard > to eMMC. > > So i decided to start at screenconnect version 3.4 and upgrade all the way > up to 4.1beta. > > 3.4 works!!! awesome because it did not work on the regular debian or > ubuntu for beaglebone prebuilt images!! > 4.0 installed fine, but I got spinning circles ( had same issue in > angstrom hence was fixed with 4.1 beta) and never stops spinning. > 4.1 beta installs fine, but no webpage at all, upon looking at top shows > mono spiking the cpu off and on. > > Right before i was going to roll back to 3.4 (about 20 minutes after > starting sc service) I was going to for fun just refresh the webpage and > BAM!! WORKS. Not sure yet how well but will test it asap. > > This has been an incredible day and a good learning experience. I think I > am about to get my dream come true which is to run screenconnect on debian > on my beagle bone black! :) > > > > On Thursday, January 9, 2014 5:23:22 PM UTC-6, Jacob Bell wrote: >> >> i thought it would be cool to add gnome desktop to the netinstall. then >> i ran your script and failed saying not enough room on target. i guess i >> need to either start all over(took allday) or somehow figure out how to >> remove gnome desktop to have enough room to hopefully install to eMMC. I am >> following this: >> http://superuser.com/questions/603392/how-to-remove-gnome-3-and-all-its-dependencies-from-a-debian-wheezy-netinst >> >> hope script works, then if so, finally will get to test screenconnect to >> see if it will run. >> >> >> >> On Thursday, January 9, 2014 12:20:04 PM UTC-6, Jacob Bell wrote: >>> >>> ok thank you for all your extended help. >>> >>> On Thursday, January 9, 2014 12:06:29 PM UTC-6, RobertCNelson wrote: >>>> >>>> On Thu, Jan 9, 2014 at 12:01 PM, Jacob Bell <[email protected]> >>>> wrote: >>>> > ok so since im ssh into my beaglebone now to the microSD running >>>> debian, and >>>> > angstrom is on eMMC, I have to flash my microSD with a flasher debian >>>> > version because angstrom probably wont run your net install, once >>>> flashed, i >>>> > boot to eMMC and i then can do the net install to the MicroSD, then >>>> boot to >>>> > the microsd, then use your script and reboot after done with microsd >>>> card >>>> > out and i should be good to go.?!?! >>>> >>>> Sorry i got lost in ^^.. >>>> >>>> My "NetInstall" doesn't really support Angstrom, as Angstrom is >>>> missing a few of the commands needed... >>>> >>>> So don't use Angstrom to run the NetInstall.. >>>> >>>> Grab either another linux box.. Running debian/ubuntu (not virtual).. >>>> or a 2nd beaglebone running debian/ubuntu.. >>>> >>>> use the microSD boot into the installer... install.. .reboot... >>>> >>>> run the script to transfer microSD to eMMC.. >>>> >>>> Regards, >>>> >>>> -- >>>> Robert Nelson >>>> http://www.rcn-ee.com/ >>>> >>> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
