Thanks for the new kernel work. I also tried 3.13-rc7 (using linux-dev scripts) for better USB, but also for the newer iio subsystem for continuous sampling of ADCs (see http://beagleboard-gsoc13.blogspot.co.at/2013/09/success-at-last.html?showComment=1386797252321#c4667539797894788582 )
Now I get ADC iio:device0 activated but only with 3 channels, ls /sys/bus/iio/devices/iio\:device0/ buffer dev in_voltage4_raw in_voltage5_raw in_voltage6_raw name power scan_elements subsystem uevent Can you give my some hints: Where are these settings done, where can I change them ? best regards winfried Am Freitag, 10. Januar 2014 15:57:54 UTC+1 schrieb RobertCNelson: > > On Fri, Jan 10, 2014 at 8:45 AM, David Lambert > <[email protected]<javascript:>> > wrote: > > I am considering moving from RCN kernel 3.8.13-bone35.1 to 3.13.0-rc7 to > > take advantage of some USB updates. It appears that device tree overlays > are > > not yet supported in the latter. My questions are: > > > > 1) Are my observations correct? > > 2) If this is true, then are device tree overlays being dropped in later > > kernel versions? > > "dropped" is really the wrong word to use... > > NO ONE has taken up the effort to fully port the 3.8 "overlays" to 3.13... > > Personally, i'm working on a workaround that works for me and for most > cape users. > > I'm just guessing, but the guy who originally wrote the 3.8 overlay > system would probably take cash in trade to keep working on it.. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
