Arch. Much faster than Debian for my application. I must admit messing with the kernel might be above my level of competency. I am but an app developer!
On Thu, Jan 23, 2014 at 9:41 AM, Micka <[email protected]> wrote: > What ? You have an angstrom image ? You should change .... Angstrom it's > over .... go to the Ubuntu/Debian image ! > > > On Thu, Jan 23, 2014 at 10:39 AM, Will Kostelecky < > [email protected]> wrote: > >> :-( >> >> >> On Thu, Jan 23, 2014 at 8:36 AM, Micka <[email protected]> wrote: >> >>> Well, >>> >>> First, thx to Robert Nelson, the patch for the touchscreen fix has been >>> implemented : >>> >>> >>> https://github.com/RobertCNelson/linux-dev/commit/20c9c32e3443826d79ea01e17cbd2d6fa2c616ae >>> >>> Which means, that now, you don't need to implement it yourself :p , you >>> just need to build the kernel and install it in your sdcard. >>> >>> Which means that soon, the fix will be implemented to each release of >>> ubuntu/debian from Robert Nelson ! >>> >>> Also Will Kostelecky, the script to install the kernel, only work for a >>> Robert Nelson image ( ubuntu/debian ) . >>> >>> >>> Micka, >>> >>> >>> >>> >>> >>> On Thu, Jan 23, 2014 at 8:45 AM, Will Kostelecky < >>> [email protected]> wrote: >>> >>>> Everything went well up to the point of actually installing the patched >>>> and rebuilt kernel! I run from an SD card so had to point the install >>>> script to it. It installed ok on the first partition but blew up on the >>>> second. I have not had a chance to dig into why yet. I am thinking of >>>> trying the upgrade on the internal drive and see if that, being what is >>>> expected by default, works better? >>>> >>>> >>>> >>>> On Wed, Jan 22, 2014 at 8:39 AM, Micka <[email protected]> wrote: >>>> >>>>> I never used rebuild_deb.sh ..... I don't know what it is for ..... >>>>> >>>>> >>>>> On Wed, Jan 22, 2014 at 9:30 AM, Will Kostelecky < >>>>> [email protected]> wrote: >>>>> >>>>>> Micka: >>>>>> >>>>>> I have gotten to the point of rebuilding the kernel and have what may >>>>>> be a dumb question before I press enter... >>>>>> >>>>>> In tools I have a rebuild.sh and a rebuild_deb.sh. Form your >>>>>> message I am guessing that I run the latter? >>>>>> >>>>>> Thanks, >>>>>> Will >>>>>> >>>>>> >>>>>> On Tue, Jan 21, 2014 at 3:08 PM, André Prado >>>>>> <[email protected]>wrote: >>>>>> >>>>>>> Thank you so much, i will do it when i get home :) >>>>>>> >>>>>>> >>>>>>> On Tue, Jan 21, 2014 at 6:16 AM, Micka <[email protected]>wrote: >>>>>>> >>>>>>>> >>>>>>>> http://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-LinuxKernel >>>>>>>> >>>>>>>> git clone git://github.com/RobertCNelson/linux-dev.git >>>>>>>> cd linux-dev/ >>>>>>>> git checkout origin/am33x-v3.8 -b tmp >>>>>>>> ./build_kernel.sh >>>>>>>> >>>>>>>> go to the file KERNEL/drivers/input/touchscreen/ti_am335x_tsc.c >>>>>>>> >>>>>>>> edit the file by following the file that I previously sent . >>>>>>>> >>>>>>>> save the file, go to the folder linux-dev, and rebuild the kernel : >>>>>>>> >>>>>>>> ./tools/rebuild something .sh >>>>>>>> >>>>>>>> micka, >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Tue, Jan 21, 2014 at 7:00 AM, Will Kostelecky < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>>> Micka: >>>>>>>>> >>>>>>>>> I second the huge thanks from Andre for the work you have done on >>>>>>>>> this to date...would also support Andre's question about the way! >>>>>>>>> If you >>>>>>>>> could give us some pointers on what we need to do, or point us to a >>>>>>>>> reference on the web, it would be greatly appreciated (even more >>>>>>>>> greatly >>>>>>>>> than hugely)! >>>>>>>>> >>>>>>>>> Cheers, >>>>>>>>> Will >>>>>>>>> >>>>>>>>> >>>>>>>>> On Tue, Jan 21, 2014 at 12:10 AM, André Prado < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>>> Micka could you please give me the way? I need to get >>>>>>>>>> https://github.com/beagleboard linux repo and compile with >>>>>>>>>> Linaro? Is that all? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Mon, Jan 20, 2014 at 12:08 PM, Micka <[email protected]>wrote: >>>>>>>>>> >>>>>>>>>>> I don't think so ( I'm not an expert on that ) But It's "easy" >>>>>>>>>>> with the Kernel from Robert Nelson to build, modify the kernel, >>>>>>>>>>> rebuild the >>>>>>>>>>> kernel, install the kernel in your sdcard .... It's what i've done >>>>>>>>>>> ... . >>>>>>>>>>> >>>>>>>>>>> I hope that Robert Nelson will include this modification for the >>>>>>>>>>> next release of the Kernel ..... >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Mon, Jan 20, 2014 at 2:32 PM, André Prado < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>>> Micka thank you so much for your work! >>>>>>>>>>>> We can compile this driver with Linaro and load it dynamically >>>>>>>>>>>> right? Using mobprobe >>>>>>>>>>>> >>>>>>>>>>>> Or am i mistaken? >>>>>>>>>>>> >>>>>>>>>>>> Cheers >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Mon, Jan 13, 2014 at 11:58 AM, Micka >>>>>>>>>>>> <[email protected]>wrote: >>>>>>>>>>>> >>>>>>>>>>>>> I would love to create a patch for you, but i don't know how >>>>>>>>>>>>> .... I tried to commit the result, but I got : >>>>>>>>>>>>> >>>>>>>>>>>>> beaglekernel@beaglekernel-VirtualBox:~/linux-dev/KERNEL$ git >>>>>>>>>>>>> commit >>>>>>>>>>>>> # On branch v3.8.13-bone35 >>>>>>>>>>>>> # Changes not staged for commit: >>>>>>>>>>>>> # (use "git add <file>..." to update what will be committed) >>>>>>>>>>>>> # (use "git checkout -- <file>..." to discard changes in >>>>>>>>>>>>> working directory) >>>>>>>>>>>>> # >>>>>>>>>>>>> # modified: drivers/input/touchscreen/ti_am335x_tsc.c >>>>>>>>>>>>> # >>>>>>>>>>>>> no changes added to commit (use "git add" and/or "git commit >>>>>>>>>>>>> -a") >>>>>>>>>>>>> beaglekernel@beaglekernel-VirtualBox:~/linux-dev/KERNEL$ git >>>>>>>>>>>>> commit drivers/input/touchscreen/ti_am335x_tsc.c >>>>>>>>>>>>> error: insufficient permission for adding an object to >>>>>>>>>>>>> repository database .git/objects >>>>>>>>>>>>> >>>>>>>>>>>>> error: drivers/input/touchscreen/ti_am335x_tsc.c: failed to >>>>>>>>>>>>> insert into database >>>>>>>>>>>>> error: unable to index file >>>>>>>>>>>>> drivers/input/touchscreen/ti_am335x_tsc.c >>>>>>>>>>>>> fatal: updating files failed >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Sun, Jan 12, 2014 at 1:35 PM, Will Kostelecky < >>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> I have the same problem with the LCD7 on Archlinux and would >>>>>>>>>>>>>> really like to get it fixed. I can't find the above file on my >>>>>>>>>>>>>> installation and am not sure where to look. Or for that matter >>>>>>>>>>>>>> what to do >>>>>>>>>>>>>> with the patched file if I were able to find it. Can someone >>>>>>>>>>>>>> help with a) >>>>>>>>>>>>>> telling me where to look for the right file to patch, and b) >>>>>>>>>>>>>> tell me how to >>>>>>>>>>>>>> build a patched driver? I am not a complete neophyte with >>>>>>>>>>>>>> Linux (I >>>>>>>>>>>>>> frequently build apps from source and can debug build problems) >>>>>>>>>>>>>> but I dont >>>>>>>>>>>>>> know where to start with drivers! >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>> Will >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thursday, 9 January 2014 07:58:47 UTC, Mickae1 wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Lan Kidd, For the patch, I'm sure that Robert Nelson will >>>>>>>>>>>>>>> include it on the next release of the kernel, same for Koen ! >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Terry Storm, well not really :) , the noise come when you >>>>>>>>>>>>>>> remove your finger, always at this time .... when the pressure >>>>>>>>>>>>>>> is not >>>>>>>>>>>>>>> enough we got some crazy x and y value .......... >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Thu, Jan 9, 2014 at 6:54 AM, Terry Storm < >>>>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Ditto. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Regarding the fix which makes this work 99% of the time... >>>>>>>>>>>>>>>> Have you considered the noise could be on the power lines >>>>>>>>>>>>>>>> which power the touch screen? >>>>>>>>>>>>>>>> One could assume the power rails are meant to be between >>>>>>>>>>>>>>>> GND and VCC, however this may not be the case. It then assumes >>>>>>>>>>>>>>>> GND is 0 and >>>>>>>>>>>>>>>> VCC is Max. Since there are 4 AIN's used, it should be >>>>>>>>>>>>>>>> possible to read the >>>>>>>>>>>>>>>> voltages... Maybe do some sort of ratio calculation or >>>>>>>>>>>>>>>> something. >>>>>>>>>>>>>>>> Just a thought. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Terry >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Thursday, 9 January 2014 07:56:11 UTC+13, Ian Kidd wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I'm going to be the helpless little girl here and ask for >>>>>>>>>>>>>>>>> a quick synopsis of how to apply the patch? I'm not sure >>>>>>>>>>>>>>>>> where the file is >>>>>>>>>>>>>>>>> that gets this Diff, because I can't locate it in >>>>>>>>>>>>>>>>> /lib/modules. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>>>>>> --- >>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>> from it, send an email to [email protected]. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> For more options, visit https://groups.google.com/ >>>>>>>>>>>>>>>> groups/opt_out. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>>>> --- >>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>> it, send an email to [email protected] >>>>>>>>>>>>>> . >>>>>>>>>>>>>> For more options, visit >>>>>>>>>>>>>> https://groups.google.com/groups/opt_out. >>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>>> --- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>>> For more options, visit >>>>>>>>>>>>> https://groups.google.com/groups/opt_out. >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> Att >>>>>>>>>>>> André >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>> --- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>> For more options, visit >>>>>>>>>>>> https://groups.google.com/groups/opt_out. >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>> --- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Att >>>>>>>>>> André >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>> --- >>>>>>>>>> You received this message because you are subscribed to a topic >>>>>>>>>> in the Google Groups "BeagleBoard" group. >>>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>>> https://groups.google.com/d/topic/beagleboard/SXTaSUf4aSk/unsubscribe >>>>>>>>>> . >>>>>>>>>> To unsubscribe from this group and all its topics, send an email >>>>>>>>>> to [email protected]. >>>>>>>>>> >>>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>> --- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "BeagleBoard" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>> --- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "BeagleBoard" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Att >>>>>>> André >>>>>>> >>>>>>> -- >>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>> --- >>>>>>> You received this message because you are subscribed to a topic in >>>>>>> the Google Groups "BeagleBoard" group. >>>>>>> To unsubscribe from this topic, visit >>>>>>> https://groups.google.com/d/topic/beagleboard/SXTaSUf4aSk/unsubscribe >>>>>>> . >>>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>>> [email protected]. >>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>> >>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "BeagleBoard" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>> >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to a topic in the >>>>> Google Groups "BeagleBoard" group. >>>>> To unsubscribe from this topic, visit >>>>> https://groups.google.com/d/topic/beagleboard/SXTaSUf4aSk/unsubscribe. >>>>> To unsubscribe from this group and all its topics, send an email to >>>>> [email protected]. >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to a topic in the >>> Google Groups "BeagleBoard" group. >>> To unsubscribe from this topic, visit >>> https://groups.google.com/d/topic/beagleboard/SXTaSUf4aSk/unsubscribe. >>> To unsubscribe from this group and all its topics, send an email to >>> [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/SXTaSUf4aSk/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
