What ? You have an angstrom image ? You should change .... Angstrom it's over .... go to the Ubuntu/Debian image !
On Thu, Jan 23, 2014 at 10:39 AM, Will Kostelecky <[email protected] > wrote: > :-( > > > On Thu, Jan 23, 2014 at 8:36 AM, Micka <[email protected]> wrote: > >> Well, >> >> First, thx to Robert Nelson, the patch for the touchscreen fix has been >> implemented : >> >> >> https://github.com/RobertCNelson/linux-dev/commit/20c9c32e3443826d79ea01e17cbd2d6fa2c616ae >> >> Which means, that now, you don't need to implement it yourself :p , you >> just need to build the kernel and install it in your sdcard. >> >> Which means that soon, the fix will be implemented to each release of >> ubuntu/debian from Robert Nelson ! >> >> Also Will Kostelecky, the script to install the kernel, only work for a >> Robert Nelson image ( ubuntu/debian ) . >> >> >> Micka, >> >> >> >> >> >> On Thu, Jan 23, 2014 at 8:45 AM, Will Kostelecky < >> [email protected]> wrote: >> >>> Everything went well up to the point of actually installing the patched >>> and rebuilt kernel! I run from an SD card so had to point the install >>> script to it. It installed ok on the first partition but blew up on the >>> second. I have not had a chance to dig into why yet. I am thinking of >>> trying the upgrade on the internal drive and see if that, being what is >>> expected by default, works better? >>> >>> >>> >>> On Wed, Jan 22, 2014 at 8:39 AM, Micka <[email protected]> wrote: >>> >>>> I never used rebuild_deb.sh ..... I don't know what it is for ..... >>>> >>>> >>>> On Wed, Jan 22, 2014 at 9:30 AM, Will Kostelecky < >>>> [email protected]> wrote: >>>> >>>>> Micka: >>>>> >>>>> I have gotten to the point of rebuilding the kernel and have what may >>>>> be a dumb question before I press enter... >>>>> >>>>> In tools I have a rebuild.sh and a rebuild_deb.sh. Form your message >>>>> I am guessing that I run the latter? >>>>> >>>>> Thanks, >>>>> Will >>>>> >>>>> >>>>> On Tue, Jan 21, 2014 at 3:08 PM, André Prado >>>>> <[email protected]>wrote: >>>>> >>>>>> Thank you so much, i will do it when i get home :) >>>>>> >>>>>> >>>>>> On Tue, Jan 21, 2014 at 6:16 AM, Micka <[email protected]> wrote: >>>>>> >>>>>>> >>>>>>> http://eewiki.net/display/linuxonarm/BeagleBone+Black#BeagleBoneBlack-LinuxKernel >>>>>>> >>>>>>> git clone git://github.com/RobertCNelson/linux-dev.git >>>>>>> cd linux-dev/ >>>>>>> git checkout origin/am33x-v3.8 -b tmp >>>>>>> ./build_kernel.sh >>>>>>> >>>>>>> go to the file KERNEL/drivers/input/touchscreen/ti_am335x_tsc.c >>>>>>> >>>>>>> edit the file by following the file that I previously sent . >>>>>>> >>>>>>> save the file, go to the folder linux-dev, and rebuild the kernel : >>>>>>> >>>>>>> ./tools/rebuild something .sh >>>>>>> >>>>>>> micka, >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Tue, Jan 21, 2014 at 7:00 AM, Will Kostelecky < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> Micka: >>>>>>>> >>>>>>>> I second the huge thanks from Andre for the work you have done on >>>>>>>> this to date...would also support Andre's question about the way! If >>>>>>>> you >>>>>>>> could give us some pointers on what we need to do, or point us to a >>>>>>>> reference on the web, it would be greatly appreciated (even more >>>>>>>> greatly >>>>>>>> than hugely)! >>>>>>>> >>>>>>>> Cheers, >>>>>>>> Will >>>>>>>> >>>>>>>> >>>>>>>> On Tue, Jan 21, 2014 at 12:10 AM, André Prado < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>>> Micka could you please give me the way? I need to get >>>>>>>>> https://github.com/beagleboard linux repo and compile with >>>>>>>>> Linaro? Is that all? >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Mon, Jan 20, 2014 at 12:08 PM, Micka <[email protected]>wrote: >>>>>>>>> >>>>>>>>>> I don't think so ( I'm not an expert on that ) But It's "easy" >>>>>>>>>> with the Kernel from Robert Nelson to build, modify the kernel, >>>>>>>>>> rebuild the >>>>>>>>>> kernel, install the kernel in your sdcard .... It's what i've done >>>>>>>>>> ... . >>>>>>>>>> >>>>>>>>>> I hope that Robert Nelson will include this modification for the >>>>>>>>>> next release of the Kernel ..... >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Mon, Jan 20, 2014 at 2:32 PM, André Prado < >>>>>>>>>> [email protected]> wrote: >>>>>>>>>> >>>>>>>>>>> Micka thank you so much for your work! >>>>>>>>>>> We can compile this driver with Linaro and load it dynamically >>>>>>>>>>> right? Using mobprobe >>>>>>>>>>> >>>>>>>>>>> Or am i mistaken? >>>>>>>>>>> >>>>>>>>>>> Cheers >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Mon, Jan 13, 2014 at 11:58 AM, Micka >>>>>>>>>>> <[email protected]>wrote: >>>>>>>>>>> >>>>>>>>>>>> I would love to create a patch for you, but i don't know how >>>>>>>>>>>> .... I tried to commit the result, but I got : >>>>>>>>>>>> >>>>>>>>>>>> beaglekernel@beaglekernel-VirtualBox:~/linux-dev/KERNEL$ git >>>>>>>>>>>> commit >>>>>>>>>>>> # On branch v3.8.13-bone35 >>>>>>>>>>>> # Changes not staged for commit: >>>>>>>>>>>> # (use "git add <file>..." to update what will be committed) >>>>>>>>>>>> # (use "git checkout -- <file>..." to discard changes in >>>>>>>>>>>> working directory) >>>>>>>>>>>> # >>>>>>>>>>>> # modified: drivers/input/touchscreen/ti_am335x_tsc.c >>>>>>>>>>>> # >>>>>>>>>>>> no changes added to commit (use "git add" and/or "git commit >>>>>>>>>>>> -a") >>>>>>>>>>>> beaglekernel@beaglekernel-VirtualBox:~/linux-dev/KERNEL$ git >>>>>>>>>>>> commit drivers/input/touchscreen/ti_am335x_tsc.c >>>>>>>>>>>> error: insufficient permission for adding an object to >>>>>>>>>>>> repository database .git/objects >>>>>>>>>>>> >>>>>>>>>>>> error: drivers/input/touchscreen/ti_am335x_tsc.c: failed to >>>>>>>>>>>> insert into database >>>>>>>>>>>> error: unable to index file >>>>>>>>>>>> drivers/input/touchscreen/ti_am335x_tsc.c >>>>>>>>>>>> fatal: updating files failed >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Sun, Jan 12, 2014 at 1:35 PM, Will Kostelecky < >>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> I have the same problem with the LCD7 on Archlinux and would >>>>>>>>>>>>> really like to get it fixed. I can't find the above file on my >>>>>>>>>>>>> installation and am not sure where to look. Or for that matter >>>>>>>>>>>>> what to do >>>>>>>>>>>>> with the patched file if I were able to find it. Can someone >>>>>>>>>>>>> help with a) >>>>>>>>>>>>> telling me where to look for the right file to patch, and b) tell >>>>>>>>>>>>> me how to >>>>>>>>>>>>> build a patched driver? I am not a complete neophyte with Linux >>>>>>>>>>>>> (I >>>>>>>>>>>>> frequently build apps from source and can debug build problems) >>>>>>>>>>>>> but I dont >>>>>>>>>>>>> know where to start with drivers! >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks, >>>>>>>>>>>>> Will >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Thursday, 9 January 2014 07:58:47 UTC, Mickae1 wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Lan Kidd, For the patch, I'm sure that Robert Nelson will >>>>>>>>>>>>>> include it on the next release of the kernel, same for Koen ! >>>>>>>>>>>>>> >>>>>>>>>>>>>> Terry Storm, well not really :) , the noise come when you >>>>>>>>>>>>>> remove your finger, always at this time .... when the pressure >>>>>>>>>>>>>> is not >>>>>>>>>>>>>> enough we got some crazy x and y value .......... >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thu, Jan 9, 2014 at 6:54 AM, Terry Storm < >>>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Ditto. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Regarding the fix which makes this work 99% of the time... >>>>>>>>>>>>>>> Have you considered the noise could be on the power lines >>>>>>>>>>>>>>> which power the touch screen? >>>>>>>>>>>>>>> One could assume the power rails are meant to be between GND >>>>>>>>>>>>>>> and VCC, however this may not be the case. It then assumes GND >>>>>>>>>>>>>>> is 0 and VCC >>>>>>>>>>>>>>> is Max. Since there are 4 AIN's used, it should be possible to >>>>>>>>>>>>>>> read the >>>>>>>>>>>>>>> voltages... Maybe do some sort of ratio calculation or >>>>>>>>>>>>>>> something. >>>>>>>>>>>>>>> Just a thought. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Terry >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Thursday, 9 January 2014 07:56:11 UTC+13, Ian Kidd wrote: >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> I'm going to be the helpless little girl here and ask for a >>>>>>>>>>>>>>>> quick synopsis of how to apply the patch? I'm not sure where >>>>>>>>>>>>>>>> the file is >>>>>>>>>>>>>>>> that gets this Diff, because I can't locate it in /lib/modules. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>>>>> --- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>> from it, send an email to [email protected]. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> For more options, visit https://groups.google.com/ >>>>>>>>>>>>>>> groups/opt_out. >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>>> --- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>>> For more options, visit >>>>>>>>>>>>> https://groups.google.com/groups/opt_out. >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>>> --- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>> For more options, visit >>>>>>>>>>>> https://groups.google.com/groups/opt_out. >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> Att >>>>>>>>>>> André >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>>> --- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out >>>>>>>>>>> . >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>>> --- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "BeagleBoard" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Att >>>>>>>>> André >>>>>>>>> >>>>>>>>> -- >>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>> --- >>>>>>>>> You received this message because you are subscribed to a topic in >>>>>>>>> the Google Groups "BeagleBoard" group. >>>>>>>>> To unsubscribe from this topic, visit >>>>>>>>> https://groups.google.com/d/topic/beagleboard/SXTaSUf4aSk/unsubscribe >>>>>>>>> . >>>>>>>>> To unsubscribe from this group and all its topics, send an email >>>>>>>>> to [email protected]. >>>>>>>>> >>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>> --- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "BeagleBoard" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to [email protected]. >>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>> >>>>>>> >>>>>>> -- >>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "BeagleBoard" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Att >>>>>> André >>>>>> >>>>>> -- >>>>>> For more options, visit http://beagleboard.org/discuss >>>>>> --- >>>>>> You received this message because you are subscribed to a topic in >>>>>> the Google Groups "BeagleBoard" group. >>>>>> To unsubscribe from this topic, visit >>>>>> https://groups.google.com/d/topic/beagleboard/SXTaSUf4aSk/unsubscribe >>>>>> . >>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>> [email protected]. >>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>> >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "BeagleBoard" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/beagleboard/SXTaSUf4aSk/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/SXTaSUf4aSk/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
